Fang-Chyou Chiu

Search results

• 2025

  Fabrication of high-performance PBS/PEBAX/TPU blend-based nanocomposites with carbon nanotube addition

  Fatima, M., 2025, 93 p.

  Research output: Types of Thesis › Master's thesis

• 奈米填充劑選擇性分散效應增強PA6/PVDF摻合體與PLA/PVDF/PMMA摻合體為基材之奈米複合材料物理性質

  Translated title of the contribution: Selective localization of nanofillers in PA6/PVDF and PLA/PVDF/PMMA blend-based nanocomposites with enhanced physical properties林鴻明, 2025, 120 p.

  Research output: Types of Thesis › Doctoral thesis

• 聚丁二酸丁二酯/熱塑性聚氨酯摻合體為基材之奈米複合材料製備及超臨界二氧化碳發泡體之性質與結構研究

  Translated title of the contribution: Study of the PBS/TPU blend-based nanocomposites and scCO2 induced composite foams張修源, 2025, 103 p.

  Research output: Types of Thesis › Master's thesis

• 聚碳酸酯/丙烯腈-丁二烯-苯乙烯共聚物摻合體為基材之奈米複合材料暨發泡體製備與性質探討

  Translated title of the contribution: Study on the Structure and Properties of PC/ABS Blend-based Nanocomposites and Supercritical CO2 Induced Foams陳星伃, 2025, 118 p.

  Research output: Types of Thesis › Master's thesis

• 2024

  以超臨界二氧化碳發泡聚乳酸/聚己二酸丁二醇酯-共-對苯二甲酸酯摻合體：添加奈米碳材效應

  Translated title of the contribution: Effect of Adding Carbon Nanofillers on the Foaming of PLA/PBAT Blends by Supercritical Carbon Dioxide張朝閔, 2024, 116 p.

  Research output: Types of Thesis › Master's thesis

• 以超臨界二氧化碳發泡聚醚-聚醯胺嵌段共聚物—添加劑的效應

  Translated title of the contribution: The Effects of Adding Additives on the Supercritical Carbon Dioxide Foaming of Poly(ether-co-amide)陳柔安, 2024, 98 p.

  Research output: Types of Thesis › Master's thesis

• 添加擴鏈劑及奈米填充劑對聚乳酸/熱塑性聚氨酯摻合體性質與發泡體結構影響之探討

  Translated title of the contribution: Study on the Effects of Chain Extender and Nanofillers on the Properties of PLA/TPU Blends and the Structure of Supercritical Carbon Dioxide-Induced Foams黃瀞誼, 2024, 109 p.

  Research output: Types of Thesis › Master's thesis

• 聚丁二酸丁二酯/熱塑性彈性體摻合體暨摻合體為基材之奈米複合材料製備與物理性質研究

  Translated title of the contribution: Fabrication and Characterization of PBS/Thermoplastic Elastomer Blend and Blend-based Nanocomposites林禹辰, 2024, 89 p.

  Research output: Types of Thesis › Master's thesis

• 2023

  Fabrication of PLA/PEBA blend-based nanocomposites with enhanced burning anti-dripping and physical properties

  Mishra, B., 2023, 68 p.

  Research output: Types of Thesis › Master's thesis

• TPEE/PLA摻合體為基材之奈米複合材料暨發泡體結構與性質探討

  Translated title of the contribution: Characterization of TPEE/PLA Blend-based Nanocomposites and scCO2 -Induced Foams詹碩慈, 2023, 123 p.

  Research output: Types of Thesis › Master's thesis

• 2022

  Ionomer/TPEE摻合體暨摻合體為基材之奈米複合材料製備與物理性質研究

  Translated title of the contribution: Fabrication and Characterization of Ionomer/TPEE Blend and Blend-based Nanocomposites陳威任, 2022, 78 p.

  Research output: Types of Thesis › Master's thesis

• 以超臨界二氧化碳發泡聚乳酸/聚己二酸丁二醇酯-共-對苯二甲酸酯摻合體為基材之奈米複合材料

  Translated title of the contribution: Foaming of PLA/PBAT Blend-based Nanocomposites by Supercritical Carbon Dioxide廖翔柏, 2022, 136 p.

  Research output: Types of Thesis › Master's thesis

• 以超臨界二氧化碳發泡聚乳酸/聚碳酸酯摻合體為基材之奈米複合材料

  Translated title of the contribution: Foaming of PLA/PC Blend-based Nanocomposites by Supercritical Carbon Dioxide黃得崴, 2022, 98 p.

  Research output: Types of Thesis › Master's thesis

• 添加奈米填充劑對聚乳酸/熱塑性聚酯彈性體摻合體性質之影響

  Translated title of the contribution: Effects of Adding Nano-Fillers on the Properties of PLA/TPEE Blends任庭妮, 2022, 124 p.

  Research output: Types of Thesis › Master's thesis

• 添加奈米填充劑與擴鏈劑對聚乳酸/熱塑性聚酯彈性體摻合體性質之影響

  Translated title of the contribution: Effects of adding nanofillers and chain extenders on the properties of PLA/TPEE blends許宜蓁, 2022, 86 p.

  Research output: Types of Thesis › Master's thesis

• 2021

  以超臨界二氧化碳發泡聚乙烯醋酸乙烯酯/奈米碳管複合材料與發泡體性質探討

  Translated title of the contribution: Characterization of EVA Blend-based Nanocomposites and sc-Carbon Dioxide Induced Foams曾宇琛, 2021, 110 p.

  Research output: Types of Thesis › Master's thesis

• 添加紅麻或絲瓜纖維對聚醯胺11/聚丙烯摻合體性質影響之探討

  Translated title of the contribution: Effect of Adding Kenaf Fiber or Luffa Fiber on the Properties of PA11/PP Blend蔡瑀謙, 2021, 88 p.

  Research output: Types of Thesis › Master's thesis

• 2020

  PBS/PVDF摻合體為基材之奈米複合材料及發泡體結構與性質探討

  Translated title of the contribution: Characterization of PBS/PVDF Blend-based Nanocomposites and Foams莊博丞, 2020, 137 p.

  Research output: Types of Thesis › Master's thesis

• 不同奈米填充劑之添加對聚丁二酸丁二酯/高密度聚乙烯摻合體性質之影響

  Translated title of the contribution: Effects of Adding Nano-Fillers on the Properties of PBS/HDPE Blends蔡見星, 2020, 80 p.

  Research output: Types of Thesis › Master's thesis

• 添加奈米填充劑對聚乳酸/聚偏二氟乙烯/聚甲基丙烯酸甲酯摻合體物理性質之影響

  Translated title of the contribution: Influence of adding nanofillers on the physical properties of PLA/PVDF/PMMA blend陳景峰, 2020, 90 p.

  Research output: Types of Thesis › Master's thesis

• 2019

  Carbon Nanotube- and Organoclay-filled Bio-polymer Blend-based Nanocomposites with Enhanced Physical Properties

  Sivanjineyulu, V., 2019, 115 p.

  Research output: Types of Thesis › Doctoral thesis

• Different Nanofiller-reinforced Biopolymer-based Nanocomposites with Enhanced Physical Properties

  Behera, K., 2019, 173 p.

  Research output: Types of Thesis › Doctoral thesis

• PBAT/HDPE摻合體與添加甘蔗渣纖維複合材料之製備與性質探討

  Translated title of the contribution: Preparation and Characterization of PBAT/HDPE Blend and Sugarcane Bagasse Fiber-added Composites詹若乙, 2019, 88 p.

  Research output: Types of Thesis › Master's thesis

• PBAT/PHBV 摻合體與添加紅麻纖維或纖維素複合材料之製備及性質探討

  Translated title of the contribution: Preparation and Characterization of PBAT/PHBV Blend and Kenaf Fiber- or Cellulose-added Composites李彥樺, 2019, 103 p.

  Research output: Types of Thesis › Master's thesis

• 以超臨界二氧化碳發泡PC/ASA/奈米碳管複合材料與發泡體結構鑑定

  Translated title of the contribution: Using supercritical carbon dioxide to prepare PC/ASA/carbon nanotube composite-based foams and the characterization of foam structures周育丞, 2019, 116 p.

  Research output: Types of Thesis › Master's thesis

• 添加聚甲基丙烯酸甲酯對聚偏二氟乙烯/聚乳酸摻合體相容性與物理性質之影響

  Translated title of the contribution: Influence of adding PMMA as a compatibilizer on the physical properties of PVDF/PLA blends劉昌宇, 2019, 104 p.

  Research output: Types of Thesis › Master's thesis

• 石墨烯與奈米黏土之添加對聚偏二氟乙烯/聚丁二酸丁二酯摻合體性質之影響

  Translated title of the contribution: The Effects of Adding Graphene Nanoplatelet and Nanoclay on the Properties of PVDF/PBS Blends廖立澄, 2019, 102 p.

  Research output: Types of Thesis › Master's thesis

• 2018

  多壁奈米碳管之添加對PC/ASA摻合體物理性質之影響

  Translated title of the contribution: Effect of adding multi-walled carbon nanotube on the physical properties of PC/ASA blends林士傑, 2018, 88 p.

  Research output: Types of Thesis › Master's thesis

• 奈米碳管/石墨烯薄片之添加對尼龍46/聚偏二氟乙烯摻合體性質之影響

  Translated title of the contribution: Effect of adding CNT/GNP on the physical properties of PA 46/PVDF blend梁子芬, 2018, 98 p.

  Research output: Types of Thesis › Master's thesis

• 聚縮醛/聚乳酸摻合體為基材之奈米複合材料製備及性質探討

  Translated title of the contribution: Fabrication and characterization of polyoxymethylene/polylactide blend-based nanocomposites屠海峰, 2018, 117 p.

  Research output: Types of Thesis › Master's thesis

• 2017

  添加奈米碳管對聚縮醛/聚乳酸摻合體物理性質之影響

  Translated title of the contribution: Influence of Adding Carbon Nanotubes on the Physical Properties of POM/PLA Blends李沛霑, 2017, 99 p.

  Research output: Types of Thesis › Master's thesis

• 聚醯胺11與紅麻/絲瓜纖維複合材料之製備與性質研究

  Translated title of the contribution: Preparation and Characterization of Polyamide 11 and Kenaf/Luffa Fibers Composites陳宜均, 2017, 118 p.

  Research output: Types of Thesis › Master's thesis

• 2016

  不同奈米填充劑之添加對聚偏二氟乙烯/聚碳酸酯摻合體物性之影響

  Translated title of the contribution: The effects of adding different nanofillers on the properties of PVDF/PC blends鍾健勝, 2016, 133 p.

  Research output: Types of Thesis › Master's thesis

• 增韌型聚縮醛摻合體(複合材料)製備

  Translated title of the contribution: Preparation of Polyoxymethylene-based Blends (Composites) with Enhanced Toughness陳湛林, 2016, 100 p.

  Research output: Types of Thesis › Master's thesis

• 多壁奈米碳管之添加對聚偏二氟乙烯/聚丁二酸丁二酯摻合體性質之影響

  Translated title of the contribution: The Effect of Adding Multi-Walled Carbon Nanotube on the Properties of PVDF/PBS Blends洪雋仁, 2016, 155 p.

  Research output: Types of Thesis › Master's thesis

• 聚丙烯/纖維素複合材料之製備與性質探討

  Translated title of the contribution: Preparation and Characterization of Polypropylene/ Cellulose Composites游喻暄, 2016, 110 p.

  Research output: Types of Thesis › Master's thesis

• 聚偏二氟乙烯/聚己二酸丁二醇酯-共-對苯二甲酸酯摻合體為基材之奈米複合材料製備與性質探討

  Translated title of the contribution: Preparation and Characterization of PVDF/PBAT Blend-based Nanocomposites林奕妏, 2016, 94 p.

  Research output: Types of Thesis › Master's thesis

• 2015

  PBAT/PEgMA摻合體及其奈米複合材料製備與鑑定

  Translated title of the contribution: Characterization of PBAT/PEgMA Blends and Blend-based Nanocomposites劉天聲, 2015, 84 p.

  Research output: Types of Thesis › Master's thesis

• 以奈米銅線及奈米氧化鋅為填充劑之對位性聚苯乙烯複合材料製備與性質分析

  Translated title of the contribution: Preparation and Characterization of sPS/CuNW and sPS/ZnO Nanocomposites鄭傑文, 2015, 109 p.

  Research output: Types of Thesis › Master's thesis

• 石墨烯之添加對聚丁二酸丁二酯與其共聚物(PBSL)性質之影響

  Translated title of the contribution: The Effect of Adding Graphene Nanoplatelets on the Properties of PBS and its PBSL copolymer劉韋辰, 2015, 132 p.

  Research output: Types of Thesis › Master's thesis

• 聚偏二氟乙烯/聚醋酸乙烯酯摻合體為基材之奈米複合材料製備與性質探討

  Translated title of the contribution: Preparation and Characterization of PVDF/PVAc Blend-based Nanocomposites莊逸彰, 2015, 108 p.

  Research output: Types of Thesis › Master's thesis

• 聚碳酸酯/聚偏二氟乙烯摻合體為基材之奈米複合材料製備與性質分析

  Translated title of the contribution: Preparation and Characterization of PC/PVDF Blend-based Nanocomposites蔡賀傑, 2015, 146 p.

  Research output: Types of Thesis › Master's thesis

• 2014

  添加奈米纖維素晶鬚對聚丁二酸丁二酯共聚物性質影響之探討

  Translated title of the contribution: Effect of adding cellulose nanowhiskers on the physical properties of poly(butylene succinate-co-butylene adipate)鍾少華, 2014, 99 p.

  Research output: Types of Thesis › Master's thesis

• 聚丁二酸丁二酯共聚物(PBSA)/埃洛石(HNT)奈米複合材料製備與性質分析

  Translated title of the contribution: Preparation and Characterization of PBSA/HNT Nanocomposites王晟達, 2014, 110 p.

  Research output: Types of Thesis › Master's thesis

• 聚丁二酸丁二酯共聚物(PBSA)/紅麻纖維(Kenaf)複合材料製備與性質研究

  Translated title of the contribution: Fabrication and Properties of PBSA/Kenaf Green Composites謝毓琦, 2014, 131 p.

  Research output: Types of Thesis › Master's thesis

• 聚丁二酸丁二酯共聚物(PBSL)/澱粉摻合體與複合材料性質探討

  Translated title of the contribution: Characterization of PBSL/Starch Blends and Composites高育祥, 2014, 101 p.

  Research output: Types of Thesis › Master's thesis

• 2013

  以奈米碳管及石墨烯微片為填充劑之對位性聚苯乙烯奈米複合材料研究

  Translated title of the contribution: Study of sPS-based Nanocomposites with Different Carbon Nanofillers Inclusion江俊諺, 2013, 111 p.

  Research output: Types of Thesis › Master's thesis

• 以靜電紡絲法製備聚偏二氟乙烯(複合材料)奈米纖維

  Translated title of the contribution: Fabrication of PVDF (Composites) Nanofibers through Electrospinning Technique莊智凱, 2013, 118 p.

  Research output: Types of Thesis › Master's thesis

• 多成分系聚乳酸/甘蔗纖維複合材料製備與性質探討

  Translated title of the contribution: Study of the PLA/Sugarcane Bagasse Fiber Multi-Component Composites鄧明峰, 2013, 136 p.

  Research output: Types of Thesis › Master's thesis

• 石墨烯之添加對聚偏二氟乙烯/聚甲基丙烯酸甲酯摻合體性質之影響

  Translated title of the contribution: The Effect of Adding Graphene Nanoplatelets on the Properties of PVDF/PMMA Blends陳盈靜, 2013, 124 p.

  Research output: Types of Thesis › Master's thesis