A fully integrated solar charger controller with input MPPT regulation protection for 10V to 28V solar-powered panel

Long Xi Chang; Chueh Hao Yu; Yi Feng Luo; Cihun Siyong Alex Gong

doi:10.1109/ISCE.2013.6570134

A fully integrated solar charger controller with input MPPT regulation protection for 10V to 28V solar-powered panel

Long Xi Chang
, Chueh Hao Yu
, Yi Feng Luo
, Cihun Siyong Alex Gong

Industrial Technology Research Institute of Taiwan

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Scopus citations

Abstract

A fully integrated solar charger controller is presented in this paper. The charger has wide input voltage range about 10V to 28V for the solar-powered panel. The input loop regulation is used here as the MPPT protection. This charger also provides different kinds of battery voltages about 4V to 12V. The controller system uses just one error amplifier and no external compensation components is needed. Besides, this controller has 600 kHz PWM modulation and offers the over-current/over-voltage protection. Other components like bandgap, reference generator, saw-tooth generator, register controller and driver circuits are all implemented in this circuit. This chip is fabricated in a 0.4-μm 5V/40V 2P4M process. The power consumption of this full-integrated solar charger controller IC is about 10mA.

Original language	English
Title of host publication	2013 IEEE 17th International Symposium on Consumer Electronics, ISCE 2013
Pages	11-12
Number of pages	2
DOIs	https://doi.org/10.1109/ISCE.2013.6570134
State	Published - 2013
Externally published	Yes
Event	2013 IEEE 17th International Symposium on Consumer Electronics, ISCE 2013 - Hsinchu, Taiwan Duration: 03 06 2013 → 06 06 2013

Publication series

Name	Proceedings of the International Symposium on Consumer Electronics, ISCE

Conference

Conference	2013 IEEE 17th International Symposium on Consumer Electronics, ISCE 2013
Country/Territory	Taiwan
City	Hsinchu
Period	03/06/13 → 06/06/13

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Access to Document

10.1109/ISCE.2013.6570134

Cite this

Chang, L. X., Yu, C. H., Luo, Y. F., & Gong, C. S. A. (2013). A fully integrated solar charger controller with input MPPT regulation protection for 10V to 28V solar-powered panel. In 2013 IEEE 17th International Symposium on Consumer Electronics, ISCE 2013 (pp. 11-12). Article 6570134 (Proceedings of the International Symposium on Consumer Electronics, ISCE). https://doi.org/10.1109/ISCE.2013.6570134

@inproceedings{8e27ed13640840cbb151b385dd0aeb0a,

title = "A fully integrated solar charger controller with input MPPT regulation protection for 10V to 28V solar-powered panel",

abstract = "A fully integrated solar charger controller is presented in this paper. The charger has wide input voltage range about 10V to 28V for the solar-powered panel. The input loop regulation is used here as the MPPT protection. This charger also provides different kinds of battery voltages about 4V to 12V. The controller system uses just one error amplifier and no external compensation components is needed. Besides, this controller has 600 kHz PWM modulation and offers the over-current/over-voltage protection. Other components like bandgap, reference generator, saw-tooth generator, register controller and driver circuits are all implemented in this circuit. This chip is fabricated in a 0.4-μm 5V/40V 2P4M process. The power consumption of this full-integrated solar charger controller IC is about 10mA.",

author = "Chang, \{Long Xi\} and Yu, \{Chueh Hao\} and Luo, \{Yi Feng\} and Gong, \{Cihun Siyong Alex\}",

year = "2013",

doi = "10.1109/ISCE.2013.6570134",

language = "英语",

isbn = "9781467361996",

series = "Proceedings of the International Symposium on Consumer Electronics, ISCE",

pages = "11--12",

booktitle = "2013 IEEE 17th International Symposium on Consumer Electronics, ISCE 2013",

note = "2013 IEEE 17th International Symposium on Consumer Electronics, ISCE 2013 ; Conference date: 03-06-2013 Through 06-06-2013",

}

Chang, LX, Yu, CH, Luo, YF & Gong, CSA 2013, A fully integrated solar charger controller with input MPPT regulation protection for 10V to 28V solar-powered panel. in 2013 IEEE 17th International Symposium on Consumer Electronics, ISCE 2013., 6570134, Proceedings of the International Symposium on Consumer Electronics, ISCE, pp. 11-12, 2013 IEEE 17th International Symposium on Consumer Electronics, ISCE 2013, Hsinchu, Taiwan, 03/06/13. https://doi.org/10.1109/ISCE.2013.6570134

A fully integrated solar charger controller with input MPPT regulation protection for 10V to 28V solar-powered panel. / Chang, Long Xi; Yu, Chueh Hao; Luo, Yi Feng et al.
2013 IEEE 17th International Symposium on Consumer Electronics, ISCE 2013. 2013. p. 11-12 6570134 (Proceedings of the International Symposium on Consumer Electronics, ISCE).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - A fully integrated solar charger controller with input MPPT regulation protection for 10V to 28V solar-powered panel

AU - Chang, Long Xi

AU - Yu, Chueh Hao

AU - Luo, Yi Feng

AU - Gong, Cihun Siyong Alex

PY - 2013

Y1 - 2013

N2 - A fully integrated solar charger controller is presented in this paper. The charger has wide input voltage range about 10V to 28V for the solar-powered panel. The input loop regulation is used here as the MPPT protection. This charger also provides different kinds of battery voltages about 4V to 12V. The controller system uses just one error amplifier and no external compensation components is needed. Besides, this controller has 600 kHz PWM modulation and offers the over-current/over-voltage protection. Other components like bandgap, reference generator, saw-tooth generator, register controller and driver circuits are all implemented in this circuit. This chip is fabricated in a 0.4-μm 5V/40V 2P4M process. The power consumption of this full-integrated solar charger controller IC is about 10mA.

AB - A fully integrated solar charger controller is presented in this paper. The charger has wide input voltage range about 10V to 28V for the solar-powered panel. The input loop regulation is used here as the MPPT protection. This charger also provides different kinds of battery voltages about 4V to 12V. The controller system uses just one error amplifier and no external compensation components is needed. Besides, this controller has 600 kHz PWM modulation and offers the over-current/over-voltage protection. Other components like bandgap, reference generator, saw-tooth generator, register controller and driver circuits are all implemented in this circuit. This chip is fabricated in a 0.4-μm 5V/40V 2P4M process. The power consumption of this full-integrated solar charger controller IC is about 10mA.

UR - https://www.scopus.com/pages/publications/84883532561

U2 - 10.1109/ISCE.2013.6570134

DO - 10.1109/ISCE.2013.6570134

M3 - 会议稿件

AN - SCOPUS:84883532561

SN - 9781467361996

T3 - Proceedings of the International Symposium on Consumer Electronics, ISCE

SP - 11

EP - 12

BT - 2013 IEEE 17th International Symposium on Consumer Electronics, ISCE 2013

T2 - 2013 IEEE 17th International Symposium on Consumer Electronics, ISCE 2013

Y2 - 3 June 2013 through 6 June 2013

ER -

A fully integrated solar charger controller with input MPPT regulation protection for 10V to 28V solar-powered panel

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this