A low voltage instrumentation amplifier for sensor applications

Hwang Cherng Chow; Hsin Ti Chou; I. Chyn Wey

doi:10.1109/ISOCC.2014.7087668

A low voltage instrumentation amplifier for sensor applications

Hwang Cherng Chow, Hsin Ti Chou, I. Chyn Wey

Chang Gung University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

A low voltage instrumentation amplifier for sensing applications such as the detection of biomedical signals is proposed. Since biomedical signals are of low frequency and small amplitude, noise has to be taken into consideration. In addition, the bio-signal amplifier should meet low power and low noise demand. Based on the 1.8V post-layout simulations of the overall circuit, the power consumption, gain and equivalent input referred noise are 25.92μW, 39.76dB and 3.44μVrms, respectively.

Original language	English
Title of host publication	ISOCC 2014 - International SoC Design Conference
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	144-145
Number of pages	2
ISBN (Electronic)	9781479951260
DOIs	https://doi.org/10.1109/ISOCC.2014.7087668
State	Published - 16 04 2015
Event	11th International SoC Design Conference, ISOCC 2014 - Jeju, Korea, Republic of Duration: 03 11 2014 → 06 11 2014

Publication series

Name	ISOCC 2014 - International SoC Design Conference

Conference

Conference	11th International SoC Design Conference, ISOCC 2014
Country/Territory	Korea, Republic of
City	Jeju
Period	03/11/14 → 06/11/14

Bibliographical note

Publisher Copyright:
© 2014 IEEE.

Keywords

amplifier
bio-signal
low noise
low voltage

Access to Document

10.1109/ISOCC.2014.7087668

Cite this

@inproceedings{34bcfad17f2c4a6596de85b007b98fc5,

title = "A low voltage instrumentation amplifier for sensor applications",

abstract = "A low voltage instrumentation amplifier for sensing applications such as the detection of biomedical signals is proposed. Since biomedical signals are of low frequency and small amplitude, noise has to be taken into consideration. In addition, the bio-signal amplifier should meet low power and low noise demand. Based on the 1.8V post-layout simulations of the overall circuit, the power consumption, gain and equivalent input referred noise are 25.92μW, 39.76dB and 3.44μVrms, respectively.",

keywords = "amplifier, bio-signal, low noise, low voltage",

author = "Chow, {Hwang Cherng} and Chou, {Hsin Ti} and Wey, {I. Chyn}",

note = "Publisher Copyright: {\textcopyright} 2014 IEEE.; 11th International SoC Design Conference, ISOCC 2014 ; Conference date: 03-11-2014 Through 06-11-2014",

year = "2015",

month = apr,

day = "16",

doi = "10.1109/ISOCC.2014.7087668",

language = "英语",

series = "ISOCC 2014 - International SoC Design Conference",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "144--145",

booktitle = "ISOCC 2014 - International SoC Design Conference",

address = "美国",

}

Chow, HC, Chou, HT & Wey, IC 2015, A low voltage instrumentation amplifier for sensor applications. in ISOCC 2014 - International SoC Design Conference., 7087668, ISOCC 2014 - International SoC Design Conference, Institute of Electrical and Electronics Engineers Inc., pp. 144-145, 11th International SoC Design Conference, ISOCC 2014, Jeju, Korea, Republic of, 03/11/14. https://doi.org/10.1109/ISOCC.2014.7087668

A low voltage instrumentation amplifier for sensor applications. / Chow, Hwang Cherng; Chou, Hsin Ti; Wey, I. Chyn.
ISOCC 2014 - International SoC Design Conference. Institute of Electrical and Electronics Engineers Inc., 2015. p. 144-145 7087668 (ISOCC 2014 - International SoC Design Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - A low voltage instrumentation amplifier for sensor applications

AU - Chow, Hwang Cherng

AU - Chou, Hsin Ti

AU - Wey, I. Chyn

PY - 2015/4/16

Y1 - 2015/4/16

N2 - A low voltage instrumentation amplifier for sensing applications such as the detection of biomedical signals is proposed. Since biomedical signals are of low frequency and small amplitude, noise has to be taken into consideration. In addition, the bio-signal amplifier should meet low power and low noise demand. Based on the 1.8V post-layout simulations of the overall circuit, the power consumption, gain and equivalent input referred noise are 25.92μW, 39.76dB and 3.44μVrms, respectively.

AB - A low voltage instrumentation amplifier for sensing applications such as the detection of biomedical signals is proposed. Since biomedical signals are of low frequency and small amplitude, noise has to be taken into consideration. In addition, the bio-signal amplifier should meet low power and low noise demand. Based on the 1.8V post-layout simulations of the overall circuit, the power consumption, gain and equivalent input referred noise are 25.92μW, 39.76dB and 3.44μVrms, respectively.

KW - amplifier

KW - bio-signal

KW - low noise

KW - low voltage

UR - http://www.scopus.com/inward/record.url?scp=84929376592&partnerID=8YFLogxK

U2 - 10.1109/ISOCC.2014.7087668

DO - 10.1109/ISOCC.2014.7087668

M3 - 会议稿件

AN - SCOPUS:84929376592

T3 - ISOCC 2014 - International SoC Design Conference

SP - 144

EP - 145

BT - ISOCC 2014 - International SoC Design Conference

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 11th International SoC Design Conference, ISOCC 2014

Y2 - 3 November 2014 through 6 November 2014

ER -

A low voltage instrumentation amplifier for sensor applications

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this