A simple strategy for improving the energy conversion of multilayered CdTe quantum dot-sensitized solar cells

Guo Yu Lan, Zusing Yang, Yang Wei Lin, Zong Hong Lin, Hao Ying Liao, Huan Tsung Chang*

*Corresponding author for this work

Research output: Contribution to journalJournal Article peer-review

93 Scopus citations

Abstract

In this paper we describe the preparation of CdTe quantum dot-sensitized solar cells (QDSSCs). We coated FTO substrates with 21 nm-diameter TiO2 nanoparticles (NPs) and then immersed the system in poly(dimethyldiallylammonium chloride) (PDDA) solution under ambient conditions. The treated substrates were then subjected to 3 nm-diameter CdTe NP solution at 100 °C for various periods of times. To increase the degree of deposition and to obtain CdTe QDs of various sizes, we performed the coating of the CdTe QDs through three heating cycles for 24, 12, or 6 h. The as-prepared (TiO2)3-PDDA-(QDCdTe)3-FTO electrodes were then used to fabricate (TiO2)3-PDDA-(QDCdTe)3-FTO QDSSCs employing 1-ethyl-3-methylimidazolium thiocyanate incorporating 1.0 M LiI and 0.1 M I2 as electrolytes. The heating treatment allows the QDSSCs to harvest energy at a higher efficiency in the visible region of solar light. As a result, the as-prepared QDSSCs feature a high energy conversion efficiency (η = 2.02%) and a high open-circuit photovoltage (Voc = 850 mV) at 100% sunlight (AM1.5, 100 mW/cm2).

Original languageEnglish
Pages (from-to)2349-2355
Number of pages7
JournalJournal of Materials Chemistry
Volume19
Issue number16
DOIs
StatePublished - 07 04 2009
Externally publishedYes

Fingerprint

Dive into the research topics of 'A simple strategy for improving the energy conversion of multilayered CdTe quantum dot-sensitized solar cells'. Together they form a unique fingerprint.

Cite this