AlGaAs/InGaAs heterostructure doped-channel FET's exhibiting good electrical performance at high temperatures

Hsien Chin Chiu, Shih Cheng Yang, Yi Jen Chan*

*Corresponding author for this work

Research output: Contribution to journalJournal Article peer-review

20 Scopus citations

Abstract

High-power and high-efficiency GaAs heterostructure field-effect transistors (FETs) are attracting tremendous attention in RF power amplifier applications. However, thermal effects can be an important issue in RF power devices, owing to the huge amount of heat generated during their operation. In this paper, the temperature-dependent characteristics of Al 0.3Ga 0.7As/In 0.15Ga 0.85As doped-channel FETs (DCFETs) are investigated and compared with conventional pseudomorphic-HEMTs (pHEMTs) devices, in terms of their dc, microwave and RF power performance at temperatures ranging from room temperature to 150°C. Due to conducting carriers being less influenced by temperature and the better Schottky diode characteristics that can be obtained in DCFETs, the intrinsic device parameters and output performance remain almost constant at high temperatures, which also results in better device reliability. The performance variation of DCFETs associated with temperatures from 25°C to 150°C all fall within a single digit, i.e., output power (P out, 16.2 dBm versus 15.8 dBm), power gain (G p, 16.6 dB versus 15.1 dB), power added efficiency (PAE, 34.2% versus 31.3%), which is not the case for conventional pHEMTs. Therefore, DC devices are very promising for microwave power device applications operating at high temperature.

Original languageEnglish
Pages (from-to)2210-2215
Number of pages6
JournalIEEE Transactions on Electron Devices
Volume48
Issue number10
DOIs
StatePublished - 10 2001
Externally publishedYes

Keywords

  • Doped-channel
  • Power performance
  • Temperature

Fingerprint

Dive into the research topics of 'AlGaAs/InGaAs heterostructure doped-channel FET's exhibiting good electrical performance at high temperatures'. Together they form a unique fingerprint.

Cite this