Crystallization kinetics and crystallization-induced morphological formation in the blends of poly(ε-caprolactone)-block-polybutadiene and polybutadiene homopolymer

Jen Yung Hsu, I. Fan Hsieh, Bhanu Nandan, Fang Choyu Chiu, Jean Hong Chen, U. Ser Jeng, Hsin Lung Chen*

*Corresponding author for this work

Research output: Contribution to journalJournal Article peer-review

35 Scopus citations

Abstract

The crystallization kinetics and the perturbation of the melt mesophase induced by crystallization in the blends of a symmetric poly(ε- caprolactone)-block-poly(1,4-butadiene) (PCL-b-PB) and a poly(1,4-butadiene) homopolymer (h-PB) have been investigated. The crystallization at low to moderate undercooling was found to break out the melt structure and transformed it into a crystalline lamellar structure. The mechanism of the morphological breakout in a cylinder-forming blend with the overall volume fraction of PB (fPB) of 0.78 was resolved by time-resolved simultaneous small-angle X-ray scattering (SAXS) and wide-angle X-ray scattering (WAXS). The results revealed two steps involved in the breakout process. At the initial stage of crystallization, the formation of crystallites within a portion of PCL cylinders deformed the microdomains and initiated local coalescence of the domains through conformational communication of the coronal PB blocks. After this stage the crystallinity started to develop rapidly, and the crystallization was proposed to occur via diffusion of PCL blocks to the crystal growth front, which then induced the formation of extended lamellar morphology. The isothermal crystallization kinetics of the cylinder-forming blend with fPB = 0.74 was also studied. Interestingly, the overall crystallization rate exhibited an abrupt increase at very large undercooling (ΔT ≃ 96 K). This anomalous acceleration of crystallization rate indicated that the crystallization kinetics was largely controlled by homogeneous nucleation when the morphological breakout was strongly restricted at very low temperatures.

Original languageEnglish
Pages (from-to)5014-5022
Number of pages9
JournalMacromolecules
Volume40
Issue number14
DOIs
StatePublished - 10 07 2007

Fingerprint

Dive into the research topics of 'Crystallization kinetics and crystallization-induced morphological formation in the blends of poly(ε-caprolactone)-block-polybutadiene and polybutadiene homopolymer'. Together they form a unique fingerprint.

Cite this