Deposition and characterization of a- and μc-Si: H thin films by ICP-CVD system with internal antennas

J. H. Hsieh*, H. C. Liang, Y. Setsuhara, C. Li

*Corresponding author for this work

Research output: Contribution to journalJournal Article peer-review

5 Scopus citations

Abstract

The plasma of an ICP-CVD system attached with four internal antennas was characterized using a plasma probe and an optical emission spectrometer (OES). Plasma density and averaged electron temperature were examined as functions of RF power input and working pressure. It is found that the averaged electron temperature would decrease with the increase of working pressure and slightly decrease with the increase of RF power. The films' crystallinity (Xc) increases with the decrease of working pressure, and with the increase of power input. At low pressure, Xc is related to electron temperature. When working pressure is fixed, the electron temperature is not affected by power input. In this case, Xc is related to the OES intensity of SiH*which is proportional to H*. For a-Si:H, the deposition rate decreases with the increase of working pressure and slightly increase with the increase of power. For μc-Si:H, the deposition rate increases with the increase of power and pressure. The quantum efficiency of the film is related to the mechanisms of forming crystalline structure, which, in turn, may reduce defect density. No relationship between IHα* and film's growth rate or Xc can be identified in this study.

Original languageEnglish
Pages (from-to)550-556
Number of pages7
JournalSurface and Coatings Technology
Volume231
DOIs
StatePublished - 25 09 2013
Externally publishedYes

Keywords

  • ICP-CVD
  • Plasma characterization
  • Si:H films

Fingerprint

Dive into the research topics of 'Deposition and characterization of a- and μc-Si: H thin films by ICP-CVD system with internal antennas'. Together they form a unique fingerprint.

Cite this