Design and implementation of DSTATCOM with symmetrical components method for fast load compensation of unbalanced distribution systems

Wei Neng Chang; Kuan Dih Yeh

doi:10.1109/PEDS.2003.1283219

Design and implementation of DSTATCOM with symmetrical components method for fast load compensation of unbalanced distribution systems

Wei Neng Chang
, Kuan Dih Yeh

Department of Electrical Engineering

Chang Gung University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

14 Scopus citations

Abstract

This paper proposes a distribution level static compensator (DSTATCOM) for the load compensation of unbalanced distribution systems. For fast response requirement, the feedforward compensation scheme with symmetrical components method is employed. First, the compensation scheme of the DSTATCOM is derived with the symmetrical components method. Then, the computer simulation with the program Matlab/Simulink preliminarily verifies the effectiveness of the DSTATCOM. Accordingly, a hardware prototype is built. A novel floating-point DSP TMS320C6711 based system is employed as the controller. A current-regulated PWM (CRPWM) inverter is used to generate the needed compensation currents. Finally, the experimental results confirm the effectiveness of the proposed DSTATCOM.

Original language	English
Title of host publication	5th International Conference on Power Electronics and Drive Systems, PEDS 2003 - Proceedings
Editors	King-Jet Tseng
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	1547-1551
Number of pages	5
ISBN (Electronic)	0780378857
DOIs	https://doi.org/10.1109/PEDS.2003.1283219
State	Published - 2003
Event	5th International Conference on Power Electronics and Drive Systems, PEDS 2003 - Singapore, Singapore Duration: 17 11 2003 → 20 11 2003

Publication series

Name	Proceedings of the International Conference on Power Electronics and Drive Systems
Volume	2

Conference

Conference	5th International Conference on Power Electronics and Drive Systems, PEDS 2003
Country/Territory	Singapore
City	Singapore
Period	17/11/03 → 20/11/03

Bibliographical note

Publisher Copyright:
© 2003 IEEE.

Keywords

DSTATCOM
Implementation
Load compensation
Symmetrical components method

Access to Document

10.1109/PEDS.2003.1283219

Cite this

Chang, W. N., & Yeh, K. D. (2003). Design and implementation of DSTATCOM with symmetrical components method for fast load compensation of unbalanced distribution systems. In K.-J. Tseng (Ed.), 5th International Conference on Power Electronics and Drive Systems, PEDS 2003 - Proceedings (pp. 1547-1551). Article 1283219 (Proceedings of the International Conference on Power Electronics and Drive Systems; Vol. 2). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/PEDS.2003.1283219

Chang, Wei Neng ; Yeh, Kuan Dih. / Design and implementation of DSTATCOM with symmetrical components method for fast load compensation of unbalanced distribution systems. 5th International Conference on Power Electronics and Drive Systems, PEDS 2003 - Proceedings. editor / King-Jet Tseng. Institute of Electrical and Electronics Engineers Inc., 2003. pp. 1547-1551 (Proceedings of the International Conference on Power Electronics and Drive Systems).

@inproceedings{0133c1e0a5b746b88ad760465a84e97e,

title = "Design and implementation of DSTATCOM with symmetrical components method for fast load compensation of unbalanced distribution systems",

abstract = "This paper proposes a distribution level static compensator (DSTATCOM) for the load compensation of unbalanced distribution systems. For fast response requirement, the feedforward compensation scheme with symmetrical components method is employed. First, the compensation scheme of the DSTATCOM is derived with the symmetrical components method. Then, the computer simulation with the program Matlab/Simulink preliminarily verifies the effectiveness of the DSTATCOM. Accordingly, a hardware prototype is built. A novel floating-point DSP TMS320C6711 based system is employed as the controller. A current-regulated PWM (CRPWM) inverter is used to generate the needed compensation currents. Finally, the experimental results confirm the effectiveness of the proposed DSTATCOM.",

keywords = "DSTATCOM, Implementation, Load compensation, Symmetrical components method",

author = "Chang, \{Wei Neng\} and Yeh, \{Kuan Dih\}",

note = "Publisher Copyright: {\textcopyright} 2003 IEEE.; 5th International Conference on Power Electronics and Drive Systems, PEDS 2003 ; Conference date: 17-11-2003 Through 20-11-2003",

year = "2003",

doi = "10.1109/PEDS.2003.1283219",

language = "英语",

series = "Proceedings of the International Conference on Power Electronics and Drive Systems",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "1547--1551",

editor = "King-Jet Tseng",

booktitle = "5th International Conference on Power Electronics and Drive Systems, PEDS 2003 - Proceedings",

address = "美国",

}

Chang, WN & Yeh, KD 2003, Design and implementation of DSTATCOM with symmetrical components method for fast load compensation of unbalanced distribution systems. in K-J Tseng (ed.), 5th International Conference on Power Electronics and Drive Systems, PEDS 2003 - Proceedings., 1283219, Proceedings of the International Conference on Power Electronics and Drive Systems, vol. 2, Institute of Electrical and Electronics Engineers Inc., pp. 1547-1551, 5th International Conference on Power Electronics and Drive Systems, PEDS 2003, Singapore, Singapore, 17/11/03. https://doi.org/10.1109/PEDS.2003.1283219

Design and implementation of DSTATCOM with symmetrical components method for fast load compensation of unbalanced distribution systems. / Chang, Wei Neng; Yeh, Kuan Dih.
5th International Conference on Power Electronics and Drive Systems, PEDS 2003 - Proceedings. ed. / King-Jet Tseng. Institute of Electrical and Electronics Engineers Inc., 2003. p. 1547-1551 1283219 (Proceedings of the International Conference on Power Electronics and Drive Systems; Vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design and implementation of DSTATCOM with symmetrical components method for fast load compensation of unbalanced distribution systems

AU - Chang, Wei Neng

AU - Yeh, Kuan Dih

PY - 2003

Y1 - 2003

N2 - This paper proposes a distribution level static compensator (DSTATCOM) for the load compensation of unbalanced distribution systems. For fast response requirement, the feedforward compensation scheme with symmetrical components method is employed. First, the compensation scheme of the DSTATCOM is derived with the symmetrical components method. Then, the computer simulation with the program Matlab/Simulink preliminarily verifies the effectiveness of the DSTATCOM. Accordingly, a hardware prototype is built. A novel floating-point DSP TMS320C6711 based system is employed as the controller. A current-regulated PWM (CRPWM) inverter is used to generate the needed compensation currents. Finally, the experimental results confirm the effectiveness of the proposed DSTATCOM.

AB - This paper proposes a distribution level static compensator (DSTATCOM) for the load compensation of unbalanced distribution systems. For fast response requirement, the feedforward compensation scheme with symmetrical components method is employed. First, the compensation scheme of the DSTATCOM is derived with the symmetrical components method. Then, the computer simulation with the program Matlab/Simulink preliminarily verifies the effectiveness of the DSTATCOM. Accordingly, a hardware prototype is built. A novel floating-point DSP TMS320C6711 based system is employed as the controller. A current-regulated PWM (CRPWM) inverter is used to generate the needed compensation currents. Finally, the experimental results confirm the effectiveness of the proposed DSTATCOM.

KW - DSTATCOM

KW - Implementation

KW - Load compensation

KW - Symmetrical components method

UR - https://www.scopus.com/pages/publications/84955249999

U2 - 10.1109/PEDS.2003.1283219

DO - 10.1109/PEDS.2003.1283219

M3 - 会议稿件

AN - SCOPUS:84955249999

T3 - Proceedings of the International Conference on Power Electronics and Drive Systems

SP - 1547

EP - 1551

BT - 5th International Conference on Power Electronics and Drive Systems, PEDS 2003 - Proceedings

A2 - Tseng, King-Jet

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 5th International Conference on Power Electronics and Drive Systems, PEDS 2003

Y2 - 17 November 2003 through 20 November 2003

ER -

Chang WN, Yeh KD. Design and implementation of DSTATCOM with symmetrical components method for fast load compensation of unbalanced distribution systems. In Tseng KJ, editor, 5th International Conference on Power Electronics and Drive Systems, PEDS 2003 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2003. p. 1547-1551. 1283219. (Proceedings of the International Conference on Power Electronics and Drive Systems). doi: 10.1109/PEDS.2003.1283219

Design and implementation of DSTATCOM with symmetrical components method for fast load compensation of unbalanced distribution systems

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this