Abstract
Cu2O-Ag thin films were co-deposited by reactive sputtering on glass substrates. During deposition, Ag contents and deposited temperatures were varied. After deposition, a UV-VIS-NIR photometer and a Hall measurement system were used to characterize the optical and electrical properties of these films. The results showed that the Cu2O-Ag thin films had a decreased optical transmittance with the increase of Ag contents. The resistivity was also decreased, which is most likely due to the formation of Ag phase. Through the measurement of photo-induced conductivity, it was found that, when Ag concentration was at 4 at.%, the film had the highest increase in conductivity under light irradiation. This is due to the co-existence of Ag2O and Cu2O. However, when deposited at a temperature higher than room temperature, the photo-induced conductivity of this film became less obvious, apparently due to the dissociation of Ag2O. The results of Photoluminescence (PL) measurement confirmed that the Cu2O-Ag(4 at.%) sample might produce more electron-hole pairs than other samples, which caused the increase of conductivity.
Original language | English |
---|---|
Pages (from-to) | 1407-1410 |
Number of pages | 4 |
Journal | Thin Solid Films |
Volume | 518 |
Issue number | 5 |
DOIs | |
State | Published - 31 12 2009 |
Externally published | Yes |
Keywords
- Co-sputtering
- CuO-Ag thin films
- Opto-electronic properties