Abstract
Organic-inorganic halide perovskite solar cells (PSCs) have recently become a promising and potentially commercially-ready photovoltaic device. However, the hysteresis effect is one of the most significant problems hindering this progress. The main reasons can be attributed to the lower electron mobility of TiO2, causing the imbalance of electron and hole flux. The shallow trap states close to the conduction band are formed by oxygen vacancy, leading to charge recombination. Therefore, elements doping is a valuable strategy for improving electron properties and passivating defects. Herein, we proposed Sn as a dopant in mesoporous structure TiO2 (meso-Sn:TiO2), causing the conduction band minimum and valence band maximum to be slightly upward shifted. The defect states decreased, and the carrier extraction improved. The PSCs with meso-Sn:TiO2 electron extraction layer improved the power conversion efficiency from 16.86% to 20.55%, enhanced the fill factor from 76.62% to 81.72%, and reduced hysteresis index from 0.16 to 0.03. This study proves that the Sn dopant is an effective strategy to improve the photovoltaic performance of PSCs.
| Original language | English |
|---|---|
| Article number | 136761 |
| Journal | Chemical Engineering Journal |
| Volume | 445 |
| DOIs | |
| State | Published - 01 10 2022 |
Bibliographical note
Publisher Copyright:© 2022 Elsevier B.V.
UN SDGs
This output contributes to the following UN Sustainable Development Goals (SDGs)
-
SDG 7 Affordable and Clean Energy
Keywords
- Defect states
- Electron extraction layer
- Passivation
- Perovskite solar cell
- Sn doped TiO
Fingerprint
Dive into the research topics of 'Efficient perovskite solar cells with low J-V hysteretic behavior based on mesoporous Sn-doped TiO2 electron extraction layer'. Together they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver