Skip to main navigation Skip to search Skip to main content

High-quality and crack-free AlxGa1-xN (x∼0.2) grown on sapphire by a two-step growth method

  • C. F. Shih
  • , M. Y. Keh
  • , Y. N. Wang
  • , N. C. Chen*
  • , Chin An Chang
  • , P. H. Chang
  • , K. S. Liu
  • *Corresponding author for this work
  • National Tsing Hua University
  • Chang Gung University

Research output: Contribution to journalJournal Article peer-review

18 Scopus citations

Abstract

We report a two-step growth of AlxGa1-xN (x∼0.2) by metal-organic vapor-phase epitaxy without a pretreatment of the substrate. High-quality, crack-free and near GaN-free AlGaN was achieved with a thickness much exceeding the theoretical critical thickness of the growth of AlGaN on GaN. The method was compared with the conventional ones such as AlGaN on AlN nucleation layer and AlGaN on GaN buffer layer. In situ reflectometry monitoring indicated different behaviors of the high temperature grown AlGaN over different underlayers. The double crystal X-ray rocking curve showed a full-width at half-maximum of only 500 arcsec for the 1.7 μm Al 0.2Ga0.8N grown. The Hall measurement showed a low background carrier concentration of 7×1017 cm-3. The electron mobility was 150 cm2 V-1 s-1 for the Al0.2Ga0.8N film doped to 2×1018 cm -3. The surface morphology and crystal quality were systematically examined at different growth stages. The likely mechanism for the strain relaxation and high-quality AlGaN films grown were also suggested.

Original languageEnglish
Pages (from-to)44-50
Number of pages7
JournalJournal of Crystal Growth
Volume277
Issue number1-4
DOIs
StatePublished - 15 04 2005

Keywords

  • A1. X-ray diffraction
  • A3. Metalorganic chemical vapour deposition
  • B2. Semiconducting III-V materials

Fingerprint

Dive into the research topics of 'High-quality and crack-free AlxGa1-xN (x∼0.2) grown on sapphire by a two-step growth method'. Together they form a unique fingerprint.

Cite this