Learning switched mode power supply design using MATLAB/SIMULINK

Wei Hsin Liao; Shun Chung Wang; Yi Hua Liu

doi:10.1109/TENCON.2009.5395993

Learning switched mode power supply design using MATLAB/SIMULINK

Wei Hsin Liao^*, Shun Chung Wang, Yi Hua Liu

^*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Scopus citations

Abstract

Switched Mode Power Supplies (SMPS) have become an indispensable part of modem electronic systems. In this paper, a generalized MATLAB/SIMULINK modeling techniques is presented. The proposed techniques have been successfully integrated into SMPS design course at Lunghua University, Taiwan. The main objective of the course is to teach final year undergraduate students and first year Master's students how to design an SMP in real life. Positive response from students indicates that the proposed technique is useful for SMPS design courses.

Original language	English
Title of host publication	TENCON 2009 - 2009 IEEE Region 10 Conference
DOIs	https://doi.org/10.1109/TENCON.2009.5395993
State	Published - 2009
Externally published	Yes
Event	2009 IEEE Region 10 Conference, TENCON 2009 - Singapore, Singapore Duration: 23 11 2009 → 26 11 2009

Publication series

Name	IEEE Region 10 Annual International Conference, Proceedings/TENCON

Conference

Conference	2009 IEEE Region 10 Conference, TENCON 2009
Country/Territory	Singapore
City	Singapore
Period	23/11/09 → 26/11/09

Keywords

MATLAB /SIMULINK
Power factor correction (PFC)
Pulsewidth modulation (PWM)
Switched mode power supply (SMPS)

Access to Document

10.1109/TENCON.2009.5395993

Cite this

@inproceedings{a03ed0498b8e4e60b4f7573fe9bad4ff,

title = "Learning switched mode power supply design using MATLAB/SIMULINK",

abstract = "Switched Mode Power Supplies (SMPS) have become an indispensable part of modem electronic systems. In this paper, a generalized MATLAB/SIMULINK modeling techniques is presented. The proposed techniques have been successfully integrated into SMPS design course at Lunghua University, Taiwan. The main objective of the course is to teach final year undergraduate students and first year Master's students how to design an SMP in real life. Positive response from students indicates that the proposed technique is useful for SMPS design courses.",

keywords = "MATLAB /SIMULINK, Power factor correction (PFC), Pulsewidth modulation (PWM), Switched mode power supply (SMPS)",

author = "Liao, {Wei Hsin} and Wang, {Shun Chung} and Liu, {Yi Hua}",

year = "2009",

doi = "10.1109/TENCON.2009.5395993",

language = "英语",

isbn = "9781424445479",

series = "IEEE Region 10 Annual International Conference, Proceedings/TENCON",

booktitle = "TENCON 2009 - 2009 IEEE Region 10 Conference",

note = "2009 IEEE Region 10 Conference, TENCON 2009 ; Conference date: 23-11-2009 Through 26-11-2009",

}

TY - GEN

T1 - Learning switched mode power supply design using MATLAB/SIMULINK

AU - Liao, Wei Hsin

AU - Wang, Shun Chung

AU - Liu, Yi Hua

PY - 2009

Y1 - 2009

N2 - Switched Mode Power Supplies (SMPS) have become an indispensable part of modem electronic systems. In this paper, a generalized MATLAB/SIMULINK modeling techniques is presented. The proposed techniques have been successfully integrated into SMPS design course at Lunghua University, Taiwan. The main objective of the course is to teach final year undergraduate students and first year Master's students how to design an SMP in real life. Positive response from students indicates that the proposed technique is useful for SMPS design courses.

AB - Switched Mode Power Supplies (SMPS) have become an indispensable part of modem electronic systems. In this paper, a generalized MATLAB/SIMULINK modeling techniques is presented. The proposed techniques have been successfully integrated into SMPS design course at Lunghua University, Taiwan. The main objective of the course is to teach final year undergraduate students and first year Master's students how to design an SMP in real life. Positive response from students indicates that the proposed technique is useful for SMPS design courses.

KW - MATLAB /SIMULINK

KW - Power factor correction (PFC)

KW - Pulsewidth modulation (PWM)

KW - Switched mode power supply (SMPS)

UR - http://www.scopus.com/inward/record.url?scp=77951145171&partnerID=8YFLogxK

U2 - 10.1109/TENCON.2009.5395993

DO - 10.1109/TENCON.2009.5395993

M3 - 会议稿件

AN - SCOPUS:77951145171

SN - 9781424445479

T3 - IEEE Region 10 Annual International Conference, Proceedings/TENCON

BT - TENCON 2009 - 2009 IEEE Region 10 Conference

T2 - 2009 IEEE Region 10 Conference, TENCON 2009

Y2 - 23 November 2009 through 26 November 2009

ER -

Learning switched mode power supply design using MATLAB/SIMULINK

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this