Load dependent dead-times controller based on minimized duty cycle technique for DC-DC buck converters

Hong Wei Huang; Chun Yu Hsieh; Ke Horng Chen; Sy Yen Kuo

doi:10.1109/PESC.2007.4342318

Load dependent dead-times controller based on minimized duty cycle technique for DC-DC buck converters

Hong Wei Huang^*
, Chun Yu Hsieh
, Ke Horng Chen
, Sy Yen Kuo

^*Corresponding author for this work

National Taiwan University
National Yang Ming Chiao Tung University
IEEE

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

11 Scopus citations

Abstract

A load dependent current-mode dead-times controller based on minimized duty cycle technique for DC-DC synchronous buck converters is proposed to achieve near -optimum dead times. This dead-times controller can dynamically adjust the dead times according to the variations of load. Experimental results demonstrate the validity of proposed circuit and power efficiency is raised about 1-5%. The chip size is 3.2 mm² in 0.35 μ CMOS process.

Original language	English
Title of host publication	PESC 07 - IEEE 38th Annual Power Electronics Specialists Conference
Pages	2037-2041
Number of pages	5
DOIs	https://doi.org/10.1109/PESC.2007.4342318
State	Published - 2007
Externally published	Yes
Event	PESC 07 - IEEE 38th Annual Power Electronics Specialists Conference - Orlando, FL, United States Duration: 17 06 2007 → 21 06 2007

Publication series

Name	PESC Record - IEEE Annual Power Electronics Specialists Conference
ISSN (Print)	0275-9306

Conference

Conference	PESC 07 - IEEE 38th Annual Power Electronics Specialists Conference
Country/Territory	United States
City	Orlando, FL
Period	17/06/07 → 21/06/07

Access to Document

10.1109/PESC.2007.4342318

Cite this

Huang, H. W., Hsieh, C. Y., Chen, K. H., & Kuo, S. Y. (2007). Load dependent dead-times controller based on minimized duty cycle technique for DC-DC buck converters. In PESC 07 - IEEE 38th Annual Power Electronics Specialists Conference (pp. 2037-2041). Article 4342318 (PESC Record - IEEE Annual Power Electronics Specialists Conference). https://doi.org/10.1109/PESC.2007.4342318

@inproceedings{ae330cd13bcf4931b4891bd2ab832398,

title = "Load dependent dead-times controller based on minimized duty cycle technique for DC-DC buck converters",

abstract = "A load dependent current-mode dead-times controller based on minimized duty cycle technique for DC-DC synchronous buck converters is proposed to achieve near -optimum dead times. This dead-times controller can dynamically adjust the dead times according to the variations of load. Experimental results demonstrate the validity of proposed circuit and power efficiency is raised about 1-5\%. The chip size is 3.2 mm2 in 0.35 μ CMOS process.",

author = "Huang, \{Hong Wei\} and Hsieh, \{Chun Yu\} and Chen, \{Ke Horng\} and Kuo, \{Sy Yen\}",

year = "2007",

doi = "10.1109/PESC.2007.4342318",

language = "英语",

isbn = "1424406552",

series = "PESC Record - IEEE Annual Power Electronics Specialists Conference",

pages = "2037--2041",

booktitle = "PESC 07 - IEEE 38th Annual Power Electronics Specialists Conference",

note = "PESC 07 - IEEE 38th Annual Power Electronics Specialists Conference ; Conference date: 17-06-2007 Through 21-06-2007",

}

Huang, HW, Hsieh, CY, Chen, KH & Kuo, SY 2007, Load dependent dead-times controller based on minimized duty cycle technique for DC-DC buck converters. in PESC 07 - IEEE 38th Annual Power Electronics Specialists Conference., 4342318, PESC Record - IEEE Annual Power Electronics Specialists Conference, pp. 2037-2041, PESC 07 - IEEE 38th Annual Power Electronics Specialists Conference, Orlando, FL, United States, 17/06/07. https://doi.org/10.1109/PESC.2007.4342318

Load dependent dead-times controller based on minimized duty cycle technique for DC-DC buck converters. / Huang, Hong Wei; Hsieh, Chun Yu; Chen, Ke Horng et al.
PESC 07 - IEEE 38th Annual Power Electronics Specialists Conference. 2007. p. 2037-2041 4342318 (PESC Record - IEEE Annual Power Electronics Specialists Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Load dependent dead-times controller based on minimized duty cycle technique for DC-DC buck converters

AU - Huang, Hong Wei

AU - Hsieh, Chun Yu

AU - Chen, Ke Horng

AU - Kuo, Sy Yen

PY - 2007

Y1 - 2007

N2 - A load dependent current-mode dead-times controller based on minimized duty cycle technique for DC-DC synchronous buck converters is proposed to achieve near -optimum dead times. This dead-times controller can dynamically adjust the dead times according to the variations of load. Experimental results demonstrate the validity of proposed circuit and power efficiency is raised about 1-5%. The chip size is 3.2 mm2 in 0.35 μ CMOS process.

AB - A load dependent current-mode dead-times controller based on minimized duty cycle technique for DC-DC synchronous buck converters is proposed to achieve near -optimum dead times. This dead-times controller can dynamically adjust the dead times according to the variations of load. Experimental results demonstrate the validity of proposed circuit and power efficiency is raised about 1-5%. The chip size is 3.2 mm2 in 0.35 μ CMOS process.

UR - https://www.scopus.com/pages/publications/48349120167

U2 - 10.1109/PESC.2007.4342318

DO - 10.1109/PESC.2007.4342318

M3 - 会议稿件

AN - SCOPUS:48349120167

SN - 1424406552

SN - 9781424406555

T3 - PESC Record - IEEE Annual Power Electronics Specialists Conference

SP - 2037

EP - 2041

BT - PESC 07 - IEEE 38th Annual Power Electronics Specialists Conference

T2 - PESC 07 - IEEE 38th Annual Power Electronics Specialists Conference

Y2 - 17 June 2007 through 21 June 2007

ER -

Load dependent dead-times controller based on minimized duty cycle technique for DC-DC buck converters

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this