Novel real-time diagnostic of injection molding process at nozzle by high-temperature ultrasonic transducer

Yi Lin Wu; Che Hua Yang; Chin Chi Cheng; Makiko Kobayashi

doi:10.1109/ULTSYM.2015.0163

Novel real-time diagnostic of injection molding process at nozzle by high-temperature ultrasonic transducer

Yi Lin Wu, Che Hua Yang, Chin Chi Cheng, Makiko Kobayashi

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Abstract

This paper presents a novel nozzle with HTUTs for detecting the mechanical properties of injection molding molded parts by comparing the amplitude of ultrasonic signals. The HTUT could operate above 250°C. The ultrasonic system was operated in transmission-through mold. The resin flow characteristics at nozzle, including dynamic flow speed and static density of polymer melt, would be monitored in-line.

Original language	English
Title of host publication	2015 IEEE International Ultrasonics Symposium, IUS 2015
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781479981823
DOIs	https://doi.org/10.1109/ULTSYM.2015.0163
State	Published - 13 11 2015
Externally published	Yes
Event	IEEE International Ultrasonics Symposium, IUS 2015 - Taipei, Taiwan Duration: 21 10 2015 → 24 10 2015

Publication series

Name	2015 IEEE International Ultrasonics Symposium, IUS 2015

Conference

Conference	IEEE International Ultrasonics Symposium, IUS 2015
Country/Territory	Taiwan
City	Taipei
Period	21/10/15 → 24/10/15

Bibliographical note

Publisher Copyright:
© 2015 IEEE.

Keywords

HUTU
nozzle
transmission-through
ultrasonic

Access to Document

10.1109/ULTSYM.2015.0163

Cite this

Wu, Y. L., Yang, C. H., Cheng, C. C., & Kobayashi, M. (2015). Novel real-time diagnostic of injection molding process at nozzle by high-temperature ultrasonic transducer. In 2015 IEEE International Ultrasonics Symposium, IUS 2015 Article 7329536 (2015 IEEE International Ultrasonics Symposium, IUS 2015). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ULTSYM.2015.0163

@inproceedings{57835a804a224d69ae441b8602ca5824,

title = "Novel real-time diagnostic of injection molding process at nozzle by high-temperature ultrasonic transducer",

abstract = "This paper presents a novel nozzle with HTUTs for detecting the mechanical properties of injection molding molded parts by comparing the amplitude of ultrasonic signals. The HTUT could operate above 250°C. The ultrasonic system was operated in transmission-through mold. The resin flow characteristics at nozzle, including dynamic flow speed and static density of polymer melt, would be monitored in-line.",

keywords = "HUTU, nozzle, transmission-through, ultrasonic",

author = "Wu, {Yi Lin} and Yang, {Che Hua} and Cheng, {Chin Chi} and Makiko Kobayashi",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.; IEEE International Ultrasonics Symposium, IUS 2015 ; Conference date: 21-10-2015 Through 24-10-2015",

year = "2015",

month = nov,

day = "13",

doi = "10.1109/ULTSYM.2015.0163",

language = "英语",

series = "2015 IEEE International Ultrasonics Symposium, IUS 2015",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2015 IEEE International Ultrasonics Symposium, IUS 2015",

address = "美国",

}

Wu, YL, Yang, CH, Cheng, CC & Kobayashi, M 2015, Novel real-time diagnostic of injection molding process at nozzle by high-temperature ultrasonic transducer. in 2015 IEEE International Ultrasonics Symposium, IUS 2015., 7329536, 2015 IEEE International Ultrasonics Symposium, IUS 2015, Institute of Electrical and Electronics Engineers Inc., IEEE International Ultrasonics Symposium, IUS 2015, Taipei, Taiwan, 21/10/15. https://doi.org/10.1109/ULTSYM.2015.0163

Novel real-time diagnostic of injection molding process at nozzle by high-temperature ultrasonic transducer. / Wu, Yi Lin; Yang, Che Hua; Cheng, Chin Chi et al.
2015 IEEE International Ultrasonics Symposium, IUS 2015. Institute of Electrical and Electronics Engineers Inc., 2015. 7329536 (2015 IEEE International Ultrasonics Symposium, IUS 2015).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Novel real-time diagnostic of injection molding process at nozzle by high-temperature ultrasonic transducer

AU - Wu, Yi Lin

AU - Yang, Che Hua

AU - Cheng, Chin Chi

AU - Kobayashi, Makiko

PY - 2015/11/13

Y1 - 2015/11/13

N2 - This paper presents a novel nozzle with HTUTs for detecting the mechanical properties of injection molding molded parts by comparing the amplitude of ultrasonic signals. The HTUT could operate above 250°C. The ultrasonic system was operated in transmission-through mold. The resin flow characteristics at nozzle, including dynamic flow speed and static density of polymer melt, would be monitored in-line.

AB - This paper presents a novel nozzle with HTUTs for detecting the mechanical properties of injection molding molded parts by comparing the amplitude of ultrasonic signals. The HTUT could operate above 250°C. The ultrasonic system was operated in transmission-through mold. The resin flow characteristics at nozzle, including dynamic flow speed and static density of polymer melt, would be monitored in-line.

KW - HUTU

KW - nozzle

KW - transmission-through

KW - ultrasonic

UR - http://www.scopus.com/inward/record.url?scp=84962003872&partnerID=8YFLogxK

U2 - 10.1109/ULTSYM.2015.0163

DO - 10.1109/ULTSYM.2015.0163

M3 - 会议稿件

AN - SCOPUS:84962003872

T3 - 2015 IEEE International Ultrasonics Symposium, IUS 2015

BT - 2015 IEEE International Ultrasonics Symposium, IUS 2015

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - IEEE International Ultrasonics Symposium, IUS 2015

Y2 - 21 October 2015 through 24 October 2015

ER -

Novel real-time diagnostic of injection molding process at nozzle by high-temperature ultrasonic transducer

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this