Power management design for lab-on-chip biosensors

Xiaojian Yu; Kambiz Moez; I. Chyn Wey; Jie Chen

doi:10.1109/EMBC.2016.7591357

Power management design for lab-on-chip biosensors

Xiaojian Yu
, Kambiz Moez
, I. Chyn Wey
, Jie Chen

Department of Electrical Engineering

University of Alberta

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Abstract

Over the past decades, we have witnessed the growth demands of portable lab-on-chip biosensors. These lab-on-chip devices are mostly powered by battery, and intelligent power management systems are required to provide supply voltage for different functional units on biosensors (e.g. a microfluidic control system might require higher voltage than the rest working units of biosensors). In this paper, a fully integrated multiple-stage voltage multiplier is proposed to provide high-voltage power needs. The proposed design was implemented with the IBM's 0.13um CMOS process with a maximum power efficiency of 81.02% and maximum voltage conversion efficiency of 99.8% under a supply voltage of 1.2 V.

Original language	English
Title of host publication	2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	2986-2989
Number of pages	4
ISBN (Electronic)	9781457702204
DOIs	https://doi.org/10.1109/EMBC.2016.7591357
State	Published - 13 10 2016
Event	38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016 - Orlando, United States Duration: 16 08 2016 → 20 08 2016

Publication series

Name	Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS
Volume	2016-October
ISSN (Print)	1557-170X

Conference

Conference	38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016
Country/Territory	United States
City	Orlando
Period	16/08/16 → 20/08/16

Bibliographical note

Publisher Copyright:
© 2016 IEEE.

Access to Document

10.1109/EMBC.2016.7591357

Cite this

Yu, X., Moez, K., Wey, I. C., & Chen, J. (2016). Power management design for lab-on-chip biosensors. In 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016 (pp. 2986-2989). Article 7591357 (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS; Vol. 2016-October). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/EMBC.2016.7591357

Yu, Xiaojian ; Moez, Kambiz ; Wey, I. Chyn et al. / Power management design for lab-on-chip biosensors. 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 2986-2989 (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS).

@inproceedings{b09637f3f2f54905823cec61344b3e75,

title = "Power management design for lab-on-chip biosensors",

abstract = "Over the past decades, we have witnessed the growth demands of portable lab-on-chip biosensors. These lab-on-chip devices are mostly powered by battery, and intelligent power management systems are required to provide supply voltage for different functional units on biosensors (e.g. a microfluidic control system might require higher voltage than the rest working units of biosensors). In this paper, a fully integrated multiple-stage voltage multiplier is proposed to provide high-voltage power needs. The proposed design was implemented with the IBM's 0.13um CMOS process with a maximum power efficiency of 81.02\% and maximum voltage conversion efficiency of 99.8\% under a supply voltage of 1.2 V.",

author = "Xiaojian Yu and Kambiz Moez and Wey, \{I. Chyn\} and Jie Chen",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016 ; Conference date: 16-08-2016 Through 20-08-2016",

year = "2016",

month = oct,

day = "13",

doi = "10.1109/EMBC.2016.7591357",

language = "英语",

series = "Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "2986--2989",

booktitle = "2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016",

address = "美国",

}

Yu, X, Moez, K, Wey, IC & Chen, J 2016, Power management design for lab-on-chip biosensors. in 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016., 7591357, Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, vol. 2016-October, Institute of Electrical and Electronics Engineers Inc., pp. 2986-2989, 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016, Orlando, United States, 16/08/16. https://doi.org/10.1109/EMBC.2016.7591357

Power management design for lab-on-chip biosensors. / Yu, Xiaojian; Moez, Kambiz; Wey, I. Chyn et al.
2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016. Institute of Electrical and Electronics Engineers Inc., 2016. p. 2986-2989 7591357 (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS; Vol. 2016-October).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Power management design for lab-on-chip biosensors

AU - Yu, Xiaojian

AU - Moez, Kambiz

AU - Wey, I. Chyn

AU - Chen, Jie

PY - 2016/10/13

Y1 - 2016/10/13

N2 - Over the past decades, we have witnessed the growth demands of portable lab-on-chip biosensors. These lab-on-chip devices are mostly powered by battery, and intelligent power management systems are required to provide supply voltage for different functional units on biosensors (e.g. a microfluidic control system might require higher voltage than the rest working units of biosensors). In this paper, a fully integrated multiple-stage voltage multiplier is proposed to provide high-voltage power needs. The proposed design was implemented with the IBM's 0.13um CMOS process with a maximum power efficiency of 81.02% and maximum voltage conversion efficiency of 99.8% under a supply voltage of 1.2 V.

AB - Over the past decades, we have witnessed the growth demands of portable lab-on-chip biosensors. These lab-on-chip devices are mostly powered by battery, and intelligent power management systems are required to provide supply voltage for different functional units on biosensors (e.g. a microfluidic control system might require higher voltage than the rest working units of biosensors). In this paper, a fully integrated multiple-stage voltage multiplier is proposed to provide high-voltage power needs. The proposed design was implemented with the IBM's 0.13um CMOS process with a maximum power efficiency of 81.02% and maximum voltage conversion efficiency of 99.8% under a supply voltage of 1.2 V.

UR - https://www.scopus.com/pages/publications/85009069247

U2 - 10.1109/EMBC.2016.7591357

DO - 10.1109/EMBC.2016.7591357

M3 - 会议稿件

C2 - 28268940

AN - SCOPUS:85009069247

T3 - Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS

SP - 2986

EP - 2989

BT - 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016

Y2 - 16 August 2016 through 20 August 2016

ER -

Yu X, Moez K, Wey IC, Chen J. Power management design for lab-on-chip biosensors. In 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016. Institute of Electrical and Electronics Engineers Inc. 2016. p. 2986-2989. 7591357. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS). doi: 10.1109/EMBC.2016.7591357

Power management design for lab-on-chip biosensors

Abstract

Publication series

Conference

Bibliographical note

Access to Document

Other files and links

Fingerprint

Cite this