TY - JOUR
T1 - Processing and characterization of solid and microcellular PHBV/PBAT blend and its RWF/nanoclay composites
AU - Javadi, Alireza
AU - Srithep, Yottha
AU - Lee, Jungjoo
AU - Pilla, Srikanth
AU - Clemons, Craig
AU - Gong, Shaoqin
AU - Turng, Lih Sheng
PY - 2010/8
Y1 - 2010/8
N2 - Solid and microcellular components made of poly (3-hydroxybutyrate-co-3- hydroxyvalerate) (PHBV)/poly (butylene adipate-co-terephthalate) (PBAT) blend (weight ratio of PHBV:PBAT = 30:70), recycled wood fiber (RWF), and nanoclay (NC) were prepared via a conventional and microcellular-injection molding process, respectively. Morphology, thermal properties, and mechanical properties were investigated. The addition of 10% RWF (both untreated and silane-treated) reduced the cell size and increased the cell density of the microcellular components. Also, the addition of 10% RWF (both untreated and silane-treated) generally increased the specific Young's modulus and tensile strength, but decreased the specific toughness and strain-at-break in both solid and microcellular components. Moreover, unlike the neat PHBV/PBAT blend, microcellular PHBV/PBAT/RWF (both untreated and silane-treated) composites showed higher specific toughness and strain-at-break compared to their solid counterparts. In addition, higher specific toughness and strain-at-break was observed in the PHBV/PBAT/untreated-RWF composite compared with the PHBV/PBAT/silane-treated RWF composite, particularly in the microcellular components. The degree of PHBV crystallinity increased significantly in both solid and microcellular PHBV/PBAT/RWF composites although the degree of PHBV crystallinity in the solid components was slightly higher than that of their microcellular counterparts. The effects of adding 2% nanoclay on the properties of the PHBV/PBAT/silane-treated-RWF composite were also investigated. The nanoclays exhibited an intercalated structure in the composites based on XRD analysis and did not induce significant changes in the cell morphology and mechanical properties of the PHBV/PBAT/silane-treated-RWF composite. However, it did improve its thermal stability.
AB - Solid and microcellular components made of poly (3-hydroxybutyrate-co-3- hydroxyvalerate) (PHBV)/poly (butylene adipate-co-terephthalate) (PBAT) blend (weight ratio of PHBV:PBAT = 30:70), recycled wood fiber (RWF), and nanoclay (NC) were prepared via a conventional and microcellular-injection molding process, respectively. Morphology, thermal properties, and mechanical properties were investigated. The addition of 10% RWF (both untreated and silane-treated) reduced the cell size and increased the cell density of the microcellular components. Also, the addition of 10% RWF (both untreated and silane-treated) generally increased the specific Young's modulus and tensile strength, but decreased the specific toughness and strain-at-break in both solid and microcellular components. Moreover, unlike the neat PHBV/PBAT blend, microcellular PHBV/PBAT/RWF (both untreated and silane-treated) composites showed higher specific toughness and strain-at-break compared to their solid counterparts. In addition, higher specific toughness and strain-at-break was observed in the PHBV/PBAT/untreated-RWF composite compared with the PHBV/PBAT/silane-treated RWF composite, particularly in the microcellular components. The degree of PHBV crystallinity increased significantly in both solid and microcellular PHBV/PBAT/RWF composites although the degree of PHBV crystallinity in the solid components was slightly higher than that of their microcellular counterparts. The effects of adding 2% nanoclay on the properties of the PHBV/PBAT/silane-treated-RWF composite were also investigated. The nanoclays exhibited an intercalated structure in the composites based on XRD analysis and did not induce significant changes in the cell morphology and mechanical properties of the PHBV/PBAT/silane-treated-RWF composite. However, it did improve its thermal stability.
KW - Injection molding
KW - Mechanical properties
KW - Polymer-matrix composites (PMCs)
UR - http://www.scopus.com/inward/record.url?scp=77955263942&partnerID=8YFLogxK
U2 - 10.1016/j.compositesa.2010.04.002
DO - 10.1016/j.compositesa.2010.04.002
M3 - 文章
AN - SCOPUS:77955263942
SN - 1359-835X
VL - 41
SP - 982
EP - 990
JO - Composites Part A: Applied Science and Manufacturing
JF - Composites Part A: Applied Science and Manufacturing
IS - 8
ER -