Processing and characterization of solid and microcellular poly(lactic acid)/polyhydroxybutyrate-valerate (PLA/PHBV) blends and PLA/PHBV/Clay nanocomposites

The morphology, microstructure, tensile properties, and dynamic mechanical properties of solid and microcellular poly(lactic acid) (PLA)/ polyhydroxybutyrate-valerate (PHBV) blends, as well as PLA/PHBV/clay nanocomposites, together with the thermal and rheological properties of solid PLA/PHBV blends and PLA/PHBV/clay nanocomposites, were investigated. Conventional and microcellular injection-molding processes were used to produce solid and microcellular specimens in the form of ASTM tensile test bars. Nitrogen in the supercritical state was used as the physical blowing agent in the microcellular injection molding experiments. In terms of rheology, the PLA/PHBV blends exhibited a Newtonian fluid behavior, and their nanocomposite counterparts showed a strong shear-thinning behavior, over the full frequency range. An obvious pseudo-solid-like behavior over a wide range of frequencies in the PLA/PHBV/clay nanocomposites suggested a strong interaction between the PLA/PHBV blend and the nanoclay that restricted the relaxation of the polymer chains. PLA/PHBV/clay nanocomposites possess a higher modulus and greater melt strength than PLA/PHBV blends. The addition of nanoclay also decreased the average cell size and increased the cell density of microcellular PLA/PHBV specimens. As a crystalline nucleating agent, nanoclay significantly improved the crystallinity of PHBV in the blend, thus leading to a relatively high modulus for both solid and microcellular specimens. However, the addition of nanoclay had less of an effect on the tensile strength and strain-at-break.