Rotational molding of two-layered polyethylene foams

Rotational molding of polyethylene foams has increasingly become an important process in industry because of its resultant thicker walls, low sound transfer, high stiffness, and good thermal insulation. This report assesses the rotomoldability of two-layer polyethylene foamed parts. The polymeric material used in this study was linear low-density polyethylene and the foaming material was an endothemic chemical blowing agent. Two different molding methods, by powder and by pellet, were used to mold the multilayer foamed parts. Rotational molding experiments were carried out in a laboratory scale uniaxial machine, capable of measuring internal mold temperature in the cycle. Characterization of molded part properties was performed after molding. Optical microscopy was also employed to determine the bubble distribution in foamed parts. The final goal of this study was to investigate how the blowing agent and processing conditions can influence the process of rotational molding and the final product quality. It was found that the rotational molding of two-layer polyethylene foams produced parts of better impact properties, as well as fine outside surfaces. In addition, rotational molding of foamed parts by pellets saves the cost of powder grinding, but is counteracted by uneven inner surfaces.