Suspended substrate stripline structures evaluation for millimeter wave circuits application

J. S. Fu; C. Lu; Chim Kwok Boon Chim Kwok; W. Y. Lee

doi:10.1117/12.425305

Suspended substrate stripline structures evaluation for millimeter wave circuits application

J. S. Fu^*, C. Lu, Chim Kwok Boon Chim Kwok, W. Y. Lee

^*Corresponding author for this work

Nanyang Technological University

Research output: Contribution to journal › Conference article › peer-review

1 Scopus citations

Abstract

Suspended Substrate Stripline (SSS) is a printed circuit technology that can be used for both broadband and narrowband filters in highpass, lowpass, bandpass, bandstop and multiplexer form. It has been widely adopted in a variety of filter designs in the upper microwave and lower millimetre-wave frequency. This paper discusses two methods of designing a suspended substrate stripline bandpass filter. The first method is based on the design equations for the capacitive transmission line filter. The second method is based on the design procedure for broadside-coupled suspended stripline (BCSSS). Investigation has been made so as to determine which of these two methods is a more suitable choice for incorporating into the final finline mixer design operating at 35GHz.

Original language	English
Pages (from-to)	24-34
Number of pages	11
Journal	Proceedings of SPIE - The International Society for Optical Engineering
Volume	4407
DOIs	https://doi.org/10.1117/12.425305
State	Published - 2001
Externally published	Yes
Event	MEMS Design, Fabrication, Characterization, and Packaging - Edinburgh, United Kingdom Duration: 30 05 2001 → 01 06 2001

Keywords

Band pass filter
Microstrip
Millimetre-wave frequency
Mixer
Suspended substrate stripline

Access to Document

10.1117/12.425305

Cite this

@article{f17618d7c87c43ac9c1e8edcc3c8245d,

title = "Suspended substrate stripline structures evaluation for millimeter wave circuits application",

abstract = "Suspended Substrate Stripline (SSS) is a printed circuit technology that can be used for both broadband and narrowband filters in highpass, lowpass, bandpass, bandstop and multiplexer form. It has been widely adopted in a variety of filter designs in the upper microwave and lower millimetre-wave frequency. This paper discusses two methods of designing a suspended substrate stripline bandpass filter. The first method is based on the design equations for the capacitive transmission line filter. The second method is based on the design procedure for broadside-coupled suspended stripline (BCSSS). Investigation has been made so as to determine which of these two methods is a more suitable choice for incorporating into the final finline mixer design operating at 35GHz.",

keywords = "Band pass filter, Microstrip, Millimetre-wave frequency, Mixer, Suspended substrate stripline",

author = "Fu, {J. S.} and C. Lu and {Boon Chim Kwok}, {Chim Kwok} and Lee, {W. Y.}",

year = "2001",

doi = "10.1117/12.425305",

language = "英语",

volume = "4407",

pages = "24--34",

journal = "Proceedings of SPIE - The International Society for Optical Engineering",

issn = "0277-786X",

publisher = "SPIE",

note = "MEMS Design, Fabrication, Characterization, and Packaging ; Conference date: 30-05-2001 Through 01-06-2001",

}

TY - JOUR

T1 - Suspended substrate stripline structures evaluation for millimeter wave circuits application

AU - Fu, J. S.

AU - Lu, C.

AU - Boon Chim Kwok, Chim Kwok

AU - Lee, W. Y.

PY - 2001

Y1 - 2001

N2 - Suspended Substrate Stripline (SSS) is a printed circuit technology that can be used for both broadband and narrowband filters in highpass, lowpass, bandpass, bandstop and multiplexer form. It has been widely adopted in a variety of filter designs in the upper microwave and lower millimetre-wave frequency. This paper discusses two methods of designing a suspended substrate stripline bandpass filter. The first method is based on the design equations for the capacitive transmission line filter. The second method is based on the design procedure for broadside-coupled suspended stripline (BCSSS). Investigation has been made so as to determine which of these two methods is a more suitable choice for incorporating into the final finline mixer design operating at 35GHz.

AB - Suspended Substrate Stripline (SSS) is a printed circuit technology that can be used for both broadband and narrowband filters in highpass, lowpass, bandpass, bandstop and multiplexer form. It has been widely adopted in a variety of filter designs in the upper microwave and lower millimetre-wave frequency. This paper discusses two methods of designing a suspended substrate stripline bandpass filter. The first method is based on the design equations for the capacitive transmission line filter. The second method is based on the design procedure for broadside-coupled suspended stripline (BCSSS). Investigation has been made so as to determine which of these two methods is a more suitable choice for incorporating into the final finline mixer design operating at 35GHz.

KW - Band pass filter

KW - Microstrip

KW - Millimetre-wave frequency

KW - Mixer

KW - Suspended substrate stripline

UR - http://www.scopus.com/inward/record.url?scp=0034844415&partnerID=8YFLogxK

U2 - 10.1117/12.425305

DO - 10.1117/12.425305

M3 - 会议文章

AN - SCOPUS:0034844415

SN - 0277-786X

VL - 4407

SP - 24

EP - 34

JO - Proceedings of SPIE - The International Society for Optical Engineering

JF - Proceedings of SPIE - The International Society for Optical Engineering

T2 - MEMS Design, Fabrication, Characterization, and Packaging

Y2 - 30 May 2001 through 1 June 2001

ER -

Suspended substrate stripline structures evaluation for millimeter wave circuits application

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this