Skip to main navigation Skip to search Skip to main content

The effect of junction temperature on the optoelectrical properties of InGaN/GaN multiple quantum well light-emitting diodes

  • Jen Cheng Wang
  • , Chia Hui Fang
  • , Ya Fen Wu
  • , Wei Jen Chen
  • , Da Chuan Kuo
  • , Ping Lin Fan
  • , Joe Air Jiang
  • , Tzer En Nee*
  • *Corresponding author for this work
  • Chang Gung University
  • Ming Chi University of Technology
  • National Taipei University of Education
  • National Taiwan University

Research output: Contribution to journalJournal Article peer-review

23 Scopus citations

Abstract

Thermal effects on the optoelectrical characteristics of green InGaN/GaN multiple quantum well (MQW) light-emitting diodes (LEDs) have been investigated in detail for a broad temperature range, from 30 °C to 100 °C. The current-dependent electroluminescence (EL) spectra, currentvoltage (IV) curves and luminescence intensitycurrent (LI) characteristics of green InGaN/GaN MQW LEDs have been measured to characterize the thermal-related effects on the optoelectrical properties of the InGaN/GaN MQW LEDs. The experimental results show that both the forward voltages decreased with a slope of -3.7 mV/K and the emission peak wavelength increased with a slope of 0.02 nm/K with increasing temperature, indicating a change in the contact resistance between the metal and GaN layers and the existence of a band gap shrinkage effect. The junction temperature estimated from the forward voltage and the emission peak shift varied from 25.6 to 14.5 °C and from 22.4 to 35.6 °C, respectively. At the same time, the carrier temperature decreased from 371.2 to 348.1 °C as estimated from the slope of high-energy side of the emission spectra. With increasing injection current, there was found to be a strong current-dependent blueshift of -0.15 nm/mA in the emission peak wavelength of the EL spectra. This could be attributed to not only the stronger band-filling effect but also the enhanced quantum confinement effect that resulted from the piezoelectric polarization and spontaneous polarization in InGaN/GaN heterostructures. We also demonstrate a helpful and easy way to measure and calculate the junction temperature of InGaN/GaN MQW LEDs.

Original languageEnglish
Pages (from-to)429-433
Number of pages5
JournalJournal of Luminescence
Volume132
Issue number2
DOIs
StatePublished - 02 2012

Keywords

  • Gallium nitride (GaN)
  • Heterostructure
  • Junction temperature
  • Light-emitting diode (LED)
  • Multiple quantum well (MQW)

Fingerprint

Dive into the research topics of 'The effect of junction temperature on the optoelectrical properties of InGaN/GaN multiple quantum well light-emitting diodes'. Together they form a unique fingerprint.

Cite this