Ultralow-loss and broadband micromachined transmission line inductors for 30-60 GHz CMOS RFIC applications

In this paper, for the first time, we demonstrate that ultralow-loss and broadband transmission line (TL) inductors can be obtained by using the CMOS-process compatible backside inductively coupled-plasma (ICP) deep-trench technology to selectively remove the silicon underneath the TL inductors. The results show that a 112.8% (from 14.37 to 30.58) and a 201.1% (from 6.33 to 19.06) increase in Q-factor, a 9.7% (from 0.91 to 0.998) and a 28.3% (from 0.778 to 0.998) increase in maximum available power gain G_Amax, and a 0.404-dB (from 0.412 to 7.6 × 10^-3 dB) and a 1.082-dB (from 1.09 to 8.4 × 10^-3 dB) reduction in minimum noise figure NF_min were achieved at 30 and 60 GHz, respectively, for a 162.2 pH TL inductor after the backside ICP dry etching. The state-of-the-art performances of the on-chip TL inductors-on-air suggest that they are very suitable for application to realize ultralow-noise 30-60-GHz CMOS radio-frequency integrated circuit. In addition, the CMOS-process compatible backside ICP etching technique is very promising for system-on-a-chip applications.