TY - JOUR
T1 - 2.4 GHz monolithic microwave mixer with lumped balanced circuits
AU - Liao, C. F.
AU - Chan, Y. J.
AU - Chiang, Y. C.
PY - 1998
Y1 - 1998
N2 - Monolithic microwave timers, operating at 2-3 GHz, have been developed, based on the lumped balanced circuit approach. By using two passive lumped balun circuits on the RF and LO ports, respectively, a wideband balanced mixer with good isolation can be realized. The conversion loss, under the IF at 200 MHz condition, was 12-14 dB at a LO power of 11 dBm. In addition, this mixer demonstrated an input IP3 of 18.9 dBm at 2.4 GHz. The simulated results, based on the large-signal models, presented a fair agreement with the measured results, which reveals the importance of device modeling.
AB - Monolithic microwave timers, operating at 2-3 GHz, have been developed, based on the lumped balanced circuit approach. By using two passive lumped balun circuits on the RF and LO ports, respectively, a wideband balanced mixer with good isolation can be realized. The conversion loss, under the IF at 200 MHz condition, was 12-14 dB at a LO power of 11 dBm. In addition, this mixer demonstrated an input IP3 of 18.9 dBm at 2.4 GHz. The simulated results, based on the large-signal models, presented a fair agreement with the measured results, which reveals the importance of device modeling.
KW - Lumped circuits
KW - Microwave monolith circuits
KW - Mixer
UR - https://www.scopus.com/pages/publications/0032048983
U2 - 10.1002/(SICI)1098-2760(19980420)17:6<357::AID-MOP6>3.0.CO;2-G
DO - 10.1002/(SICI)1098-2760(19980420)17:6<357::AID-MOP6>3.0.CO;2-G
M3 - 文章
AN - SCOPUS:0032048983
SN - 0895-2477
VL - 17
SP - 357
EP - 359
JO - Microwave and Optical Technology Letters
JF - Microwave and Optical Technology Letters
IS - 6
ER -