A one-step input matching method for cascode CMOS low-noise amplifiers

Ming Chang Sun*, Ying Haw Shu, Shing Tenqchen, Wu Shiung Feng

*此作品的通信作者

研究成果: 期刊稿件文章同行評審

摘要

In the design of cascode CMOS low-noise amplifiers, the gate-drain capacitance is generally neglected because it is thought to be small enough compared to gate-source capacitance. However, a careful examination will reveal the fact that the drain impedance of the input transistor significantly affects the input impedance through the gate-drain capacitance, especially as the CMOS technology getting more and more advanced. Moreover, the substrate coupling network of the input transistor also comes into play when the drain impedance of the input transistor is high enough compared to the substrate coupling network. In order to make input matching easier, it is desirable to know the details of the substrate coupling network. Unfortunately, designers generally do not have enough information about the technology they have used, not to mention knowing the details concerning the substrate coupling network. As a matter of fact, designers generally do have foundry provided component models that contain information about the substrate coupling network. This gives us the chance to minimize its effect and predict the input impedance of a low noise amplifier more accurately. In this paper, we show that the effect of the substrate coupling network can be ignored by keeping the drain impedance of the input transistor low enough and a proper drain impedance can then be chosen to achieve input matching without the need of iteration steps. Simulation results of a 2.4 GHz CMOS low noise amplifier using foundry provided component models are also presented to demonstrate the validation of the proposed input matching method.

原文英語
頁(從 - 到)420-427
頁數8
期刊IEICE Transactions on Electronics
E88-C
發行號3
DOIs
出版狀態已出版 - 2005

指紋

深入研究「A one-step input matching method for cascode CMOS low-noise amplifiers」主題。共同形成了獨特的指紋。

引用此