Characterization of silicon-based ultrasonic nozzles

Y. L. Song*, S. C. Tsai, Y. F. Chou, W. J. Chen, T. K. Tseng, C. S. Tsai, J. W. Chen, Y. D. Yao, C. H. Yang, M. F. Huang, Y. A. Lai

*此作品的通信作者

研究成果: 期刊稿件文章同行評審

1 引文 斯高帕斯(Scopus)

摘要

This paper presents the design and characterization of micro-fabricated 0.5 MHz silicon-based ultrasonic nozzles. Each nozzle is made of a piezoelectric drive section and a silicon-resonator consisting of five Fourier horns, each with half wavelength design and twice amplitude magnification. Results of impedance analysis and measurement of longitudinal vibration confirmed the simulation results with one pure longitudinal vibration mode at the resonant frequency in excellent agreement with the design value. Furthermore, at the resonant frequency, the measured longitudinal vibration amplitude gain at the nozzle tip of the 5-horn nozzle is in good agreement with the theoretical values of 25. Using this design, very high vibration amplitude gain at the nozzle tip can be achieved with no reduction in the tip cross sectional area for contact of liquid to be atomized. Therefore, the required electric drive power should be drastically reduced, thus avoiding transducer failure in ultrasonic atomization using the 5-horn ultrasonic nozzle.

原文英語
頁(從 - 到)123-127
頁數5
期刊Tamkang Journal of Science and Engineering
7
發行號2
出版狀態已出版 - 06 2004
對外發佈

指紋

深入研究「Characterization of silicon-based ultrasonic nozzles」主題。共同形成了獨特的指紋。

引用此