Convective heat transfer performance of FC-72 in a pin-finned channel

Liang Han Chien*, S. Y. Pei, T. Y. Wu

*此作品的通信作者

研究成果: 圖書/報告稿件的類型會議稿件同行評審

1 引文 斯高帕斯(Scopus)

摘要

This study investigates the influence of the heat flux and mass velocity on convective heat transfer performance of FC-72 in a rectangular channel of 20mm in width and 2 mm in height. The heated side has either a smooth surface or a pin-finned surface. The inlet fluid temperature is maintained at 30°C. The total length of the test channel is 113 mm, with a heated length of 25mm. The flow rate varies between 80 and 960 ml/min, and the heat flux sets between 18 and 50 W/cm2. The experimental results show that the controlling variable is heat flux instead of flow rate because of the boiling activities in FC-72. At a fixed flow rate, the pin-finned surface yields up to 20% higher heat transfer coefficient and greater critical heat flux than those of a smooth surface.

原文英語
主出版物標題Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008
頁面677-683
頁數7
版本PART A
DOIs
出版狀態已出版 - 2008
對外發佈
事件6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008 - Darmstadt, 德國
持續時間: 23 06 200825 06 2008

出版系列

名字Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008
號碼PART A

Conference

Conference6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008
國家/地區德國
城市Darmstadt
期間23/06/0825/06/08

指紋

深入研究「Convective heat transfer performance of FC-72 in a pin-finned channel」主題。共同形成了獨特的指紋。

引用此