Design and implementation of a statcom based on a multilevel FHB converter with delta-connected configuration for unbalanced load compensation

Wei Neng Chang; Ching Huan Liao

doi:10.3390/en10070921

Design and implementation of a statcom based on a multilevel FHB converter with delta-connected configuration for unbalanced load compensation

Wei Neng Chang^*
, Ching Huan Liao

^*此作品的通信作者

電機工程學系(含學碩博士班及碩士在職專班)

Chung-shan Institute of Science and Technology Taiwan

研究成果: 期刊稿件 › 文章 › 同行評審

17 引文斯高帕斯（Scopus）

摘要

A delta-connected STATCOM with cascade multilevel full H-bridge (FHB) converter has been applied for phase balancing and power factor correction of unbalanced load in a three-phase, three-wire power distribution system. In this paper, a feedforward compensation formula is presented for the STATCOM by using the symmetrical components method to compensate unbalanced load. Computer simulation is performed for preliminary verification. Accordingly, a hardware prototype employing a TMS320F2812 DSP-based system is built for final verification test. Experimental results show that the proposed STATCOM is very effective for real-time unbalanced load compensation.

原文	英語
文章編號	921
期刊	Energies
卷	10
發行號	7
DOIs	https://doi.org/10.3390/en10070921
出版狀態	已出版 - 2017

文獻附註

Publisher Copyright:
© 2017 by the authors.

存取文件

10.3390/en10070921

其它文件與鏈接

Link to publication in Scopus

引用此

@article{42ffa9c4e98a4b0fbfba55b4a72beb21,

title = "Design and implementation of a statcom based on a multilevel FHB converter with delta-connected configuration for unbalanced load compensation",

abstract = "A delta-connected STATCOM with cascade multilevel full H-bridge (FHB) converter has been applied for phase balancing and power factor correction of unbalanced load in a three-phase, three-wire power distribution system. In this paper, a feedforward compensation formula is presented for the STATCOM by using the symmetrical components method to compensate unbalanced load. Computer simulation is performed for preliminary verification. Accordingly, a hardware prototype employing a TMS320F2812 DSP-based system is built for final verification test. Experimental results show that the proposed STATCOM is very effective for real-time unbalanced load compensation.",

keywords = "FHB, Hardware test, Load compensation, STATCOM, Symmetrical components method",

author = "Chang, \{Wei Neng\} and Liao, \{Ching Huan\}",

note = "Publisher Copyright: {\textcopyright} 2017 by the authors.",

year = "2017",

doi = "10.3390/en10070921",

language = "英语",

volume = "10",

journal = "Energies",

issn = "1996-1073",

publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",

number = "7",

}

TY - JOUR

T1 - Design and implementation of a statcom based on a multilevel FHB converter with delta-connected configuration for unbalanced load compensation

AU - Chang, Wei Neng

AU - Liao, Ching Huan

PY - 2017

Y1 - 2017

N2 - A delta-connected STATCOM with cascade multilevel full H-bridge (FHB) converter has been applied for phase balancing and power factor correction of unbalanced load in a three-phase, three-wire power distribution system. In this paper, a feedforward compensation formula is presented for the STATCOM by using the symmetrical components method to compensate unbalanced load. Computer simulation is performed for preliminary verification. Accordingly, a hardware prototype employing a TMS320F2812 DSP-based system is built for final verification test. Experimental results show that the proposed STATCOM is very effective for real-time unbalanced load compensation.

AB - A delta-connected STATCOM with cascade multilevel full H-bridge (FHB) converter has been applied for phase balancing and power factor correction of unbalanced load in a three-phase, three-wire power distribution system. In this paper, a feedforward compensation formula is presented for the STATCOM by using the symmetrical components method to compensate unbalanced load. Computer simulation is performed for preliminary verification. Accordingly, a hardware prototype employing a TMS320F2812 DSP-based system is built for final verification test. Experimental results show that the proposed STATCOM is very effective for real-time unbalanced load compensation.

KW - FHB

KW - Hardware test

KW - Load compensation

KW - STATCOM

KW - Symmetrical components method

UR - https://www.scopus.com/pages/publications/85025140754

U2 - 10.3390/en10070921

DO - 10.3390/en10070921

M3 - 文章

AN - SCOPUS:85025140754

SN - 1996-1073

VL - 10

JO - Energies

JF - Energies

IS - 7

M1 - 921

ER -

Design and implementation of a statcom based on a multilevel FHB converter with delta-connected configuration for unbalanced load compensation

摘要

文獻附註

存取文件

其它文件與鏈接

指紋

引用此