跳至主導覽 跳至搜尋 跳過主要內容

Effects of nanoclays on the thermal stability and flame retardancy of microcellular thermoplastic polyurethane nanocomposites

  • Xin Chao Wang
  • , Tie Geng
  • , Jian Han
  • , Chun Tai Liu
  • , Chang Yu Shen
  • , Lih Sheng Turng*
  • , Hsinjin Edwin Yang
  • *此作品的通信作者
  • Henan University of Technology
  • Zhengzhou University
  • University of Wisconsin-Madison
  • Pioneer Scientific Solutions LLC

研究成果: 期刊稿件 › 文章 › 同儕審查

31 引文 斯高帕斯(Scopus)

摘要

Microcellular nanocomposite foams based on thermoplastic polyurethane (TPU) and organically modified layered clays were prepared via an efficient foaming method, microcellular injection molding (MIM). The morphology of the nanoclays was characterized by X-ray diffraction (XRD) and transmission electron microscopy. The results revealed that the layered nanoclays in the nanocomposite foams achieved a well dispersed morphology within the cell walls due to the MIM foaming process. Postburn SEM images showed that TPU/NC10 foam (with 10 wt% nanoclay) was able to maintain its foam porosity, original shape, and microcellular structure due to the synergistic effects of its microcellular structure and the fully dispersed nanoclays. Thermal stability and flame resistance were assessed by thermogravimetric analysis (TGA) and microscale combustion calorimetry, respectively. TGA results indicated that the nanocomposite foams had a significant decline in the thermal degradation rate compared to the unfilled TPU/NR foam. The flame resistance tests showed that the heat release capacity (HRC) of TPU/NC10 foams was substantially lower (27% lower) than that of the unfilled TPU/NR foam. The char yield of the TPU/NC10 foam was 19.14%, which was almost 18 times higher than that of the unfilled TPU/NR foam. With the presence of the microcellular structure, the HRC values decreased from 266.8 J/g k for solid TPU/NC10 to 235.5 J/g k for TPU/NC10 foams. This work combines two flame retardant mechanisms—the thermal barrier effect of the nanoclay layers and the microcellular self-intumescing system—in the nanocomposite foams. Our study also provides substantial motivation to produce novel, environmentally-benign, and flame-retardant TPU foam using microcellular injection molding. POLYM. COMPOS., 39:E1429–E1440, 2018.

原文英語
頁(從 - 到)E1429-E1440
期刊Polymer Composites
卷39
DOIs
出版品狀態已出版 - 06 2018
對外發佈是

文獻附註

Publisher Copyright:
© 2017 Society of Plastics Engineers

指紋

深入研究「Effects of nanoclays on the thermal stability and flame retardancy of microcellular thermoplastic polyurethane nanocomposites」主題。共同形成了獨特的指紋。

引用此