Experimental study of foamed polyethylene in rotational molding

Shih Jung Liu; Chia Hsun Tsai

Experimental study of foamed polyethylene in rotational molding

Shih Jung Liu^*
, Chia Hsun Tsai

^*此作品的通信作者

機械工程學系(含學碩博士班)

Chang Gung University

研究成果: 會議稿件的類型 › 論文 › 同行評審

4 引文斯高帕斯（Scopus）

摘要

Rotational molding of polyethylene foams has increasingly become an important process in industry because of their thicker walls, lower sound transfer, higher stiffness and good thermal insulation. However the foaming process of polyethylene in rotational molding has not been well studied. The focus of this research is to examine the rotomoldability of foamed polyethylene and their molded product properties. Characterization of powder and molded part properties has been performed. In addition the role of blowing agent on the process was studied.

原文	英語
頁面	1161-1165
頁數	5
出版狀態	已出版 - 1998
事件	Proceedings of the 1998 56th Annual Technical Conference, ANTEC. Part 1 (of 3) - Atlanta, GA, USA 持續時間: 26 04 1998 → 30 04 1998

Conference

Conference	Proceedings of the 1998 56th Annual Technical Conference, ANTEC. Part 1 (of 3)
城市	Atlanta, GA, USA
期間	26/04/98 → 30/04/98

其它文件與鏈接

Link to publication in Scopus

引用此

@conference{0b92cce7d6ce47de9cc2c8273895c91d,

title = "Experimental study of foamed polyethylene in rotational molding",

abstract = "Rotational molding of polyethylene foams has increasingly become an important process in industry because of their thicker walls, lower sound transfer, higher stiffness and good thermal insulation. However the foaming process of polyethylene in rotational molding has not been well studied. The focus of this research is to examine the rotomoldability of foamed polyethylene and their molded product properties. Characterization of powder and molded part properties has been performed. In addition the role of blowing agent on the process was studied.",

author = "Liu, \{Shih Jung\} and Tsai, \{Chia Hsun\}",

year = "1998",

language = "英语",

pages = "1161--1165",

note = "Proceedings of the 1998 56th Annual Technical Conference, ANTEC. Part 1 (of 3) ; Conference date: 26-04-1998 Through 30-04-1998",

}

TY - CONF

T1 - Experimental study of foamed polyethylene in rotational molding

AU - Liu, Shih Jung

AU - Tsai, Chia Hsun

PY - 1998

Y1 - 1998

N2 - Rotational molding of polyethylene foams has increasingly become an important process in industry because of their thicker walls, lower sound transfer, higher stiffness and good thermal insulation. However the foaming process of polyethylene in rotational molding has not been well studied. The focus of this research is to examine the rotomoldability of foamed polyethylene and their molded product properties. Characterization of powder and molded part properties has been performed. In addition the role of blowing agent on the process was studied.

AB - Rotational molding of polyethylene foams has increasingly become an important process in industry because of their thicker walls, lower sound transfer, higher stiffness and good thermal insulation. However the foaming process of polyethylene in rotational molding has not been well studied. The focus of this research is to examine the rotomoldability of foamed polyethylene and their molded product properties. Characterization of powder and molded part properties has been performed. In addition the role of blowing agent on the process was studied.

UR - https://www.scopus.com/pages/publications/0031676006

M3 - 论文

AN - SCOPUS:0031676006

SP - 1161

EP - 1165

T2 - Proceedings of the 1998 56th Annual Technical Conference, ANTEC. Part 1 (of 3)

Y2 - 26 April 1998 through 30 April 1998

ER -

Experimental study of foamed polyethylene in rotational molding

摘要

Conference

其它文件與鏈接

指紋

引用此