跳至主導覽 跳至搜尋 跳過主要內容

Model Simulation and Design Optimization of a Can Combustor with Methane/Syngas Fuels for a Micro Gas Turbine

  • Chi Rong Liu
  • , Ming Tsung Sun
  • , Hsin Yi Shih*
  • *此作品的通信作者
  • Chang Gung University

研究成果: 期刊稿件 › 文章 › 同儕審查

5 引文 斯高帕斯(Scopus)

摘要

The design and model simulation of a can combustor has been made for future syngas combustion application in a micro gas turbine. An improved design of the combustor is studied in this work, where a new fuel injection strategy and film cooling are employed. The simulation of the combustor is conducted by a computational model, which consists of three-dimensional, compressible k-ϵ model for turbulent flows and PPDF (Presumed Probability Density Function) model for combustion process invoking a laminar flamelet assumption generated by detailed chemical kinetics from GRI 3.0. Thermal and prompt NOx mechanisms are adopted to predict the NO formation. The modeling results indicated that the high temperature flames are stabilized in the center of the primary zone by radially injecting the fuel inward. The exit temperatures of the modified can combustor drop and exhibit a more uniform distribution by coupling film cooling, resulting in a low pattern factor. The combustion characteristics were then investigated and the optimization procedures of the fuel compositions and fuel flow rates were developed for future application of methane/syngas fuels in the micro gas turbine.

原文英語
頁(從 - 到)85-99
頁數15
期刊International Journal of Turbo and Jet Engines
卷38
發行號1
DOIs
出版品狀態已出版 - 01 03 2021

文獻附註

Publisher Copyright:
© 2018 Walter de Gruyter GmbH, Berlin/Boston 2018.

指紋

深入研究「Model Simulation and Design Optimization of a Can Combustor with Methane/Syngas Fuels for a Micro Gas Turbine」主題。共同形成了獨特的指紋。

引用此