Optimization strategies for injection molding

L. S. Turng; H. H. Chiang; J. F. Stevenson

Optimization strategies for injection molding

L. S. Turng^*
, H. H. Chiang
, J. F. Stevenson

^*此作品的通信作者

AC Technology

研究成果: 會議稿件的類型 › 論文 › 同行評審

8 引文斯高帕斯（Scopus）

摘要

An initial consideration of design processing optimization strategies aimed at reducing injection pressure and clamp force is presented. A series of simulations that properly take into account the process physics is conducted. Finally, it is emphasized that thinner parts are naturally suited for high-speed molding, whereas thicker parts have a longer optimum fill time, with injection pressure being relatively insensitive to injection rate.

原文	英語
頁面	668-672
頁數	5
出版狀態	已出版 - 1995
對外發佈	是
事件	Proceedings of the 53rd Annual Technical Conference. Part 1 (of 3) - Boston, MA, USA 持續時間: 07 05 1995 → 11 10 1995

Conference

Conference	Proceedings of the 53rd Annual Technical Conference. Part 1 (of 3)
城市	Boston, MA, USA
期間	07/05/95 → 11/10/95

其它文件與鏈接

Link to publication in Scopus

引用此

@conference{51c9a0cc66e04b00bd023d89678e453d,

title = "Optimization strategies for injection molding",

abstract = "An initial consideration of design processing optimization strategies aimed at reducing injection pressure and clamp force is presented. A series of simulations that properly take into account the process physics is conducted. Finally, it is emphasized that thinner parts are naturally suited for high-speed molding, whereas thicker parts have a longer optimum fill time, with injection pressure being relatively insensitive to injection rate.",

author = "Turng, \{L. S.\} and Chiang, \{H. H.\} and Stevenson, \{J. F.\}",

year = "1995",

language = "英语",

pages = "668--672",

note = "Proceedings of the 53rd Annual Technical Conference. Part 1 (of 3) ; Conference date: 07-05-1995 Through 11-10-1995",

}

TY - CONF

T1 - Optimization strategies for injection molding

AU - Turng, L. S.

AU - Chiang, H. H.

AU - Stevenson, J. F.

PY - 1995

Y1 - 1995

N2 - An initial consideration of design processing optimization strategies aimed at reducing injection pressure and clamp force is presented. A series of simulations that properly take into account the process physics is conducted. Finally, it is emphasized that thinner parts are naturally suited for high-speed molding, whereas thicker parts have a longer optimum fill time, with injection pressure being relatively insensitive to injection rate.

AB - An initial consideration of design processing optimization strategies aimed at reducing injection pressure and clamp force is presented. A series of simulations that properly take into account the process physics is conducted. Finally, it is emphasized that thinner parts are naturally suited for high-speed molding, whereas thicker parts have a longer optimum fill time, with injection pressure being relatively insensitive to injection rate.

UR - https://www.scopus.com/pages/publications/0029210335

M3 - 论文

AN - SCOPUS:0029210335

SP - 668

EP - 672

T2 - Proceedings of the 53rd Annual Technical Conference. Part 1 (of 3)

Y2 - 7 May 1995 through 11 October 1995

ER -

Optimization strategies for injection molding

摘要

Conference

其它文件與鏈接

指紋

引用此