Using the Taguchi technique to optimize the rotational molding process

Shih Jung Liu; C. C. Lai; S. T. Lin

Using the Taguchi technique to optimize the rotational molding process

Shih Jung Liu^*
, C. C. Lai
, S. T. Lin

^*此作品的通信作者

機械工程學系(含學碩博士班)

Chang Gung University

研究成果: 會議稿件的類型 › 論文 › 同行評審

摘要

Rotational molding is one of the most important methods to produce hollow plastic articles. However the optimization of this process has been essentially based on experiences or trial-and-error. The focus of this study is to use the Taguchi technique to optimize the rotational molding process. It is to present an organized approach employing statistics to investigate the many possible factors that affect the tensile and impact strength of rotational molded parts.

原文	英語
頁面	3189-3193
頁數	5
出版狀態	已出版 - 1997
事件	Proceedings of the 1997 55th Annual Technical Conference, ANTEC. Part 3 (of 3) - Toronto, Can 持續時間: 27 04 1997 → 02 05 1997

Conference

Conference	Proceedings of the 1997 55th Annual Technical Conference, ANTEC. Part 3 (of 3)
城市	Toronto, Can
期間	27/04/97 → 02/05/97

其它文件與鏈接

Link to publication in Scopus

引用此

@conference{a3b29cf5f28a495ea26075fe64961fa4,

title = "Using the Taguchi technique to optimize the rotational molding process",

abstract = "Rotational molding is one of the most important methods to produce hollow plastic articles. However the optimization of this process has been essentially based on experiences or trial-and-error. The focus of this study is to use the Taguchi technique to optimize the rotational molding process. It is to present an organized approach employing statistics to investigate the many possible factors that affect the tensile and impact strength of rotational molded parts.",

author = "Liu, \{Shih Jung\} and Lai, \{C. C.\} and Lin, \{S. T.\}",

year = "1997",

language = "英语",

pages = "3189--3193",

note = "Proceedings of the 1997 55th Annual Technical Conference, ANTEC. Part 3 (of 3) ; Conference date: 27-04-1997 Through 02-05-1997",

}

TY - CONF

T1 - Using the Taguchi technique to optimize the rotational molding process

AU - Liu, Shih Jung

AU - Lai, C. C.

AU - Lin, S. T.

PY - 1997

Y1 - 1997

N2 - Rotational molding is one of the most important methods to produce hollow plastic articles. However the optimization of this process has been essentially based on experiences or trial-and-error. The focus of this study is to use the Taguchi technique to optimize the rotational molding process. It is to present an organized approach employing statistics to investigate the many possible factors that affect the tensile and impact strength of rotational molded parts.

AB - Rotational molding is one of the most important methods to produce hollow plastic articles. However the optimization of this process has been essentially based on experiences or trial-and-error. The focus of this study is to use the Taguchi technique to optimize the rotational molding process. It is to present an organized approach employing statistics to investigate the many possible factors that affect the tensile and impact strength of rotational molded parts.

UR - https://www.scopus.com/pages/publications/0030681956

M3 - 论文

AN - SCOPUS:0030681956

SP - 3189

EP - 3193

T2 - Proceedings of the 1997 55th Annual Technical Conference, ANTEC. Part 3 (of 3)

Y2 - 27 April 1997 through 2 May 1997

ER -

Using the Taguchi technique to optimize the rotational molding process

摘要

Conference

其它文件與鏈接

指紋

引用此